CJONE's latest activity

I built one for mine, looks like the one pictured with a stouter tooth. It centers the load on the loader and is better that most...

I should have specified the 15 to 20 amp circuits my bad. Now as far as overhead lines yes aluminum is used but they are also ACSR with...

Test the start cap as tinhack said it is [possibly] bad but normally once they fail they are dead. My guess is the POS aluminum wire...

Do NOT use clamps to keep 2500psi of pressure contained!! The bite type fittings that PTSG recommended work fine just retighten after a...

I have a 48" light duty grapple, and yes I have bent it many times. And a 84" HD grapple that is a Bobcat brand that was a double lid...

Yep, sometimes a narrow grapple is better. This one is 44 inches wide: But will grapple wide things:

No. When I purchased my tractor it was the best value for my $$. Not the best price but value. My local dealer is 150 miles away...

Thats total flow, he would be lucky to see 6-8 at the remotes. CJ

Yea, the harder you run it the least amount of time it will regen. It will be harder to adapt for a gear tractor unless you were pulling...

Any 1/2" quick coupler will outflow a compact tractor, 10GPM is nothing for a 1/2" with basically no to very little pressure drop. 3/8"...

There is no "standard" when it comes to couplers as Kenny said. Most of the time the ISO A series or 5675 are used and like he said they...

Use my equipment for free, cost me more than anything! Let no good deed go unpunished. CJ