Recent content by coolhl7

  1. C

    CHECK THIS OUT BEFORE ITS PULLED OFF CRAIGLIST

    too funny David Brown 990A 57hp tractor
  2. C

    how much is too much or too little

    I have a 40HP HST I was wondering (after all the warnings we read in manuals) how much extra oil is too much that it would cause problems? Is too much worse than too little???? just kind of curious........Thanks.
  3. C

    Fitting leaks during storage

    The bottom fitting to my bucket strated to leak after only 90 hrs on my MF1540. But it doesnt leak when operating. Only after it has cooled down. about 1/2 cup on the ground in 2 days. could someone explain why it leaks at all, and why not when the bucket is being used or the tractor is running...
  4. C

    low kickback vs full chisel chain

    I have always used a low kickback chain but I can get a good deal on some 20 inch full chisel chains. Is there really a noticable difference in kickback? I have heard the argument that if you are careful to begin with there should be no need for low kickback chains......it seems to me, with my...
  5. C

    50 HOUR 1540 HYDRO

    Is there anything tricky about doing the 50 hour? just change engine and transmission oil and filters, checking the fuel filter, greasing zerks, and checking bolts for proper torque. Is there really anything else they do at the shop that I couldn't do or that is tricky??? Thanks
  6. C

    Air Tool Oil ? is it necessary?

    will any penetrating type oil do for occassional use (such as using a 3 inch cutter etc) or is specific air tool oil that much better? Thanks
  7. C

    Grading  MF 560 box blade

    does anyone have one and what did you pay and any comments? also, who makes them for MF? Thanks.
  8. C

    zerk size?

    does anyone know the exact zerk size on the 1500 series? I assume it is metric???
  9. C

    chainsaw chains

    what do most here feel about using a file freehand vs using a filing guide.
  10. C

    Tire pressure when loaded

    how does loading a tire with water affect tire pressure requirements? do you fill the remaining 20% not filled with water to the factory specs for air pressure or is there some adjustment due to the water? thanks.
  11. C

    rear PTO lever wont engage sometimes

    My rear PTO lever often wont engage on my MF1540HST. sometimes it will. sometimes it wont. however, if I turn the yellow PTO knob on the dash for just a few seconds I can then engage my rear PTO. The manual says to never turn that yellow knob w/o first engaging the rear PTO but what else can I...
  12. C

    1540 rear PTO lever wont engage

    My rear PTO lever often wont engage on my 1540HST. sometimes it will. sometimes it wont. however, if I turn the yellow PTO knob on the dash for just a few seconds I can then engage my rear PTO. The manual says to never turn that yellow knob w/o first engaging the rear PTO but what else can I do...
  13. C

    air compressors

    I dont know squat about air compressors but I need to get one for my tractor, car, trailers etc. I really just need it for tires, cleaning off filters, etc what should I look for in a reliable yet relatively inexpensive model. Thanks guys!
  14. C

    I love TractorByNet.com

    This has to be the most helpful website I have encountered over the last 10 years. NO BS. No big egos. No trollers. A BIG thanks to those who keep it going!
  15. C

    Lifting straps or chains

    Which is safer for lifting heavy items with the FEL, straps or chains of equivalent ratings? most of the "towing" chains I see specifically warn against using them for lifting but I figure that is CYA litigation protection... all advice appreciated. Thanks
Top