Recent content by corelokt308win

Any input on maintaining and servicing would be appreciated, a manual would be great.

I am going to be pulling the head off my Isuzu engine and need a head gasket set and the info / specs for the job. Anyone? I also ate another tach cable. The replacement I had was way long and got caught and yanked. The things that happen when you dunk the front under water...

I need the lower pulley crank bolt.

Anyone know if it is 16mmx1.5 or 16mmx1.25? An odd question I know, but mine has fallen out and left me with a couple driveways full of snow.

Hey all, I am in need of a four wheel drive type oil pan for my TL2100F. These are different than the 2wd version, the left half is lower than the right, making room for the driveshaft. Mine leaks where I broke off the dipstick tube. Please someone find me one.

My TL2100F lost hydraulic pressure. No loader movement and no 3-point. I drained the oil and it's frothy looking with clumps in it, makes me think water. I also removed the filter and it looked the same. I'm obviously going to put new fluid and a new filter in it. I'm also going to pull the...

I'd like to somehow rig wider front tires on my little Iseki TL2100 four wheel drive. The tires are always getting me stuck due to the loader weight. Are there wider rims with similar diameter, or could these be widened?

Shows my bucket with homemade forks and also the uprights to protect the loader hoses when logs roll back while pushing and lifting them. Also shows my rear hitch box with 2 inch receiver and hydraulic winch, chainsaw carrier, chain holders that also carry peavy's and shovels and such. My...

Things is real empty round here.

Like the header says, I need an oil pan for a TL2100F with the Isuzu engine.

Buried my Iseki in a beaver pond. No one could get their Kubota's and Belarus' near it to pull it out. Had to hire a skidder. Such is how it goes when one owns the most go anywhere tractor on the block and finally finds a spot it won't go itself out of. Beavers one, Iseki four in the winning...

Hey all, Just found this forum. I've built a 2" square hitch adapter that hooks into my 3 point and allows me to tow trailers, manure wagons, use my winch, skid logs, and more. How I did it was to take a 3 point draw bar, weld heavy wall 1.5" square tubing to it to form a square. Attach a...

Hello all, Been awhile, in other words, no major issues of late, except... I need a tach cable for my TL2100F, also, I would like to install an oil pressure gauge and volt gauge. The volt gauge is no problem. The oil gauge, I would like it to be electric. Anyone know of a sender source...

Hello, My dad has an International 424 diesel and needs an exhaust manifold. I see that many Mahindra parts interchange and I need to know if an exhaust manifold will fit it from Mahindra? Also, if so, where do I find one? His tractor is a 60's vintage english diesel 424 International...

Well... The diff lock still aint right, and now I busted the hydraulic filter and housing right off the tractor on a stump. I've plumbed it straight with no filter for now, but not looking forward to using it without filtration untill the parts come in.