crazyal's latest activity

  • crazyal
    The blade on my Evolution 380 has a number of chipped carbide teeth and several that are missing. So it looks like it's time to replace...
  • crazyal
    crazyal replied to the thread When to plane rough cut lumber?.
    I had some green rough cut red maple that I tried to dry but at the time I didn't have an open area. Before it could dry powder post...
  • crazyal
    crazyal replied to the thread Kubota overheated!.
    Seems like a remote pressure gauge might be worthwhile to monitor the cooling system. It would be useful to know if it's too high...
  • crazyal
    crazyal replied to the thread ATV Tubeless Tire Repair.
    Just remember that you may run the tire at 4 psi but once you debead the tire you'll need more pressure to mount it again. If it's that...
  • crazyal
    crazyal replied to the thread Kubota overheated!.
    I'm guessing thick weeds means your radiator most likely needs to be cleaned out. I would change the engine oil and send out a sample...
  • crazyal
    crazyal replied to the thread Pouring fuel from cans.
    For gas I have valve stems. For diesel (which I don't do very often) I use round plastic racing gas cans. The hole in the top is about...
  • crazyal
    Sorry but the dealer should have easily caught this. Every cashier's check has the name of the bank and a phone number on it. It's not...
  • crazyal
    crazyal replied to the thread Premium UDT Oil for Kubota.
    I was going to order some from Messick's a few years ago but the shipping was a killer. I paid more per gallon at a local dealer and...
  • crazyal
    I've had the 18v now for about 10 years now. No problems. I don't have any M12 tools so it was an easy choice. It doesn't use much...
  • crazyal
    crazyal replied to the thread How to use all of this sawdust?.
    I've looked into it, not so much for sawdust but for wood chips. The stuff you put into the mill has to be very fine. Usually you need...
  • crazyal
    With all this talk about record high diesel and gas prices and how big oil is raking in profits what's missed is the biggest winner...
  • crazyal
    Tomorrow I'm sure some of us will find out. I'm trying to decide if I drive an hour and a half to a HF or just order on-line. If I...
  • crazyal
    Gone are the days when you had to climb into the engine bay to work on a pickup. The engineering problem with those old square body GMs...
  • crazyal
    I have several Makita tools. The cordless ones I've moved to Milwaukee after having problems with battery life but their corded stuff...
  • crazyal
    There's no HF close to me so I haven't gotten a replacement yet. I did pick up a Bauer jigsaw and it's worked just fine (except that...
 
Top