Cycledude's latest activity
-
Cycledude reacted to kozal01's post in the thread Sthil Commercial Line Trimmers with 4 Cycle engines (still require 50:1 fuel/oil mix) - any experience with
Good Post.
I actually prefer the Autocut head on my Stihl over the Feed Speed I have on my Maruyama for two reasons. The Stihl holds more line and... -
Cycledude reacted to RjCorazza's post in the thread Sthil Commercial Line Trimmers with 4 Cycle engines (still require 50:1 fuel/oil mix) - any experience with Good Post.
I'm sure you will like that trimmer. Do yourself a favor and get an Echo SpeedFeed head for it. I run them on my Stihl trimmers, and...
-
Just about to buy my first tractor, so be gentle with my ignorance. I have a 6 acre property in the Sierra Foothills in Northern...
-
Cycledude reacted to tractorbiglover123123's post in the thread Making a Three Point Hitch with Good Post.
It does not unfortunately, complete bareback with just a drawbar.
-
Cycledude replied to the thread Making a Three Point Hitch.Hopefully reading this old thread might be of some help. https://www.redpowermagazine.com/forums/topic/49746-adding-3pt-to-806/
-
Cycledude replied to the thread Making a Three Point Hitch.Unfortunately I suspect it wasn’t until the later years of the 806 that they started offering them with the 3 point hookup option . Does...
-
Cycledude replied to the thread Making a Three Point Hitch.Have you checked with any junkyards about possibly buying the factory 3 point hitch from a junked 806 ?
-
Cycledude reacted to Asteral's post in the thread 1st Regen Mode and then to the Shop with Good Post.
we were recently told at the last class i took with LS, on the ls regens that you should be keeping you tractor at 2200 rpm or higher at...
-
Cycledude replied to the thread I just bought a 440 Steiner. Very nice machine, but.....Sorry you got stuck with such a lousy machine maybe try putting it up for sale and see if someone else might be interested in buying it.
-
Cycledude replied to the thread Need advice on a machine to manage timberland.With 4,000+ acres You will definitely need more equipment than just a big dozer ! Probably better off putting the work out on bids first...
-
Cycledude replied to the thread 3-Point Hitch Upgrade for stabilizer arms?.My 2019 XR4155 arms seem to be built considerably different than yours, only 500 hours but i haven’t experienced any trouble yet. If...
-
Cycledude replied to the thread Price Check Sell or Scrap.Looks like a lot of work but for someone that’s into that type of thing it looks like a project with some pretty reasonable money making...
-
Cycledude replied to the thread Cleaning Under Zero-Turn Deck After Every Session: Really Necessary?.I believe that electric raise-lower-tilt for cleaning is a $500+ option, one of my brother in laws bought one after using his...
-
Cycledude reacted to Yanmar CC's post in the thread No, I am NOT going to try to take down a dead 100' Hickory tree! with Good Post.
This comment adds no value to the topic, why did you post it? Seriously, what’s your point…to say you would have done better or to...
-
Cycledude reacted to California's post in the thread No, I am NOT going to try to take down a dead 100' Hickory tree! with Good Post.
Actualy, getting bids may be worthwhile. My neighbor at the orchard had a row of tall ancient Eucalyptus that put too much shade on...