Cycledude's latest activity
-
Ibelive what the tire says is donot exceed 30lbs in seating beed, 15lbs should be close for loaded tires on that size tire. I only run... -
Cycledude reacted to oldnslo's post in the thread Calcium filled tires… Same pressure test? with
Good Post.
Agree don’t look under inflated in that picture. We ran similar pressure with fluid vs without. I would suspect 12 - 15 PSI for a tire... -
Cycledude replied to the thread Calcium filled tires… Same pressure test?.If you have Harbor Freight in your area https://www.harborfreight.com/search?q=Liquid%20tire%20air%20pressure%20gauge
-
Cycledude reacted to kozal01's post in the thread Sthil Commercial Line Trimmers with 4 Cycle engines (still require 50:1 fuel/oil mix) - any experience with Good Post.
I measure with my arms, I'm 6"2" so my arm span is close to that and I pull 4 arm span lengths off the spool each time so I'm putting...
-
Cycledude reacted to BigBlue1's post in the thread Sthil Commercial Line Trimmers with 4 Cycle engines (still require 50:1 fuel/oil mix) - any experience with Good Post.
The manual for my auto cut head says it should take 7m (23') of .105 line per strand but there's no way that much fits. I do about half...
-
I went down to 16psi in the rears (noticeably better than the 24psi the dealer put in after adding the RimGuard) and even with the wood...
-
I've had this feature on every CUT I've owned, but they were all Deere, so maybe it's just a Deere thing. I honestly thought all...
-
My Branson has a "pin" that can be rotated to allow more "float" in the lift arms. My IH has two different places to fasten the lift...
-
Cycledude reacted to Muhammad's post in the thread There should be a forum rule against AI-generated slop with Good Post.
We generally don't allow that. Report the posts.
-
Cycledude replied to the thread Not to Brag, but....Pretty interesting setup but I have never noticed that before. It sure doesn’t appear that by turning that pin you would be able to lift...
-
I've owned 3 Deere's (3033r, 855, 750), and all had two different positions for the pins on the connectors between the rockshaft arms...
-
On mine, besides have the adjustable side link with the hand crank, also has 2 holes and a slot on each side link. The holes are self...
-
Yep, I've never heard of that either.
-
It is available. There are tractors that even have hydraulic stabilizers along with the hydraulic side link. Typically available in...
-
Cycledude replied to the thread Magic Jack.One of my friends used Magic Jack for quite awhile, sometimes it worked great but a lot of times it didn’t, eventually he quit using it...