Cycledude's latest activity

Yeah, Im sure different shape lines could affect that. Im running Echo Black Diamond in my Stihl and Rotary Vortex in my Maruyama so...

I haven’t needed to be able to turn the PTO shaft on my LS tractor in order to hookup a PTO but after reading so many folks saying they...

Yep... with the PTO in N, it should turn by hand with no problem. Keep the PTO shaft clean and oiled. I use transmission fluid with a...

Now that's something I'll need to try out! Thanks for the idea.. JB

Amen. But at least it's easier to deal with on a PTO shaft than in locks.

On my pro shafts they will slide on about an inch before you have to pull then collar Back. Also on my two Kubotas with engine off I...

Same. But in my case it's a spray bottle that I fill from the gallon can, and it's kept in the shed where I park the tractor. Give the...

Read a bunch of similar posts. Tried it. Doesn't turn. The shaft turns only about half an inch and when I let go off it, it turns back...

I keep a can of wd 40 in my tractors tool box. A little spray on both the pto and the shaft before I try and put it on the tractor...

Most but not all tires have a pressure embossed on the sidewall but I believe the number actually indicates the maximum safe air...

The tire should be filled with beet juice to just below the valve stem when it's at the top. When they pump in the beet juice, the only...

Just make sure implement is compatable. Not all are

Well said...been there, done that, got the T-shirt. Now, anything I build on the Farm is twice the size I think I need! Still have time...

I've made some modifications to my 1970's 10' Sidewinder. It's a drawbar hitch, and I welded on some loops and added a spring to keep...

The sad truth of my life, which has been entirely defined by a very long series of continuous projects, is that I am forever building...