dadohead's latest activity

I'm sorry, I don't know what "it" is. I also dont see the "black tick marks" and what they represent. Here's all we'll need: A pic...

Very interesting thread. A lot of R&D went into this project and it's nice to read a complete explanation of what is happening when the...

Sorry hadn’t had time to hook it back up and measure it. It is a 114” wide mower 57” to center. On my TC45DA the left tire measured...

"Back-sweep" is the portion of the blade going backward as the deck moves forward. This is typically the best cutting region on each...

I'd shift the mower... if mower tongue is fixed, could you prepare a crossbar and bolt it to the tractor hitch? Hook up the mower...

Oh yeah: if deck cant shift... shift the LH rear tractor tire inward. See if the stripe disappears/improves.

Yes, the 'stake test'. Part of the ANSI battery of tests. A solid (1"?) steel stake is fired up into each blade at a specified...

Every deck seems to require a different type of blade. I worked for a blade manufacturer. There were a couple of tests we did that...

Ok, I'm convinced. Please ship my free demo unit (in Kioti Orange) with account funding for fuel and wear parts. We will provide future...

Woods knows what they're doing. With 3 lifts already available, I would assume their high lift would be as good as you could get. I...

Yes, I had wings welded on. The stock Fred Cain 3' blades I started with were very low lift... just a small 'tip up' for a wing...

That is an exceptionally well-done project. You certainly put all your acquired skills to work on it and it came out great. I'll guess...

Cost. Pull-type mowers require at least 2 rear wheels and external hydraulics to operate the lift. Since their driveshafts operate in...

1. Axially: in the direction of the fan axis. Bring the height of the rings just into the blade wing height to create maximum lift...

Smart. But I'm an old rotary guy who's not smart! Would not trade the 72" WOC with 1 foot right side trim for 48" flail. Yes, the...