dadohead's latest activity
-
dadohead replied to the thread Tire Tread and Gear Ratios.With the center of the rear axle being the origin (0,0,0) of the tractor model, the SLR determines the "ground plane".... all the lift... -
The SLR is what I still look for when looking at tires, I have always been surprised that the SLR and the rolling circumference (RC)...
-
dadohead replied to the thread Tire Tread and Gear Ratios.When I designed tractors at Deere... we'd use SLR: static loaded radius. In later years it got more difficult to get precise numbers...
-
dadohead replied to the thread Tire Tread and Gear Ratios.It's common to overdrive the front wheels 3% over the rears.... less it won't turn... more = front tire wear.
-
On smaller two-wheeled tractors the procedure you're describing is called "bump starting". These smaller engines don't have a ton of...
-
My wife and I will frequently split a meal if at a restaurant and bring leftovers home for another meal or two. I have never liked...
-
When you look at any type of gear shift tractor, there are three areas to consider. When I was looking at tractors, I found it took a...
-
dadohead reacted to al3's post in the thread X500/K72 Tuff Torque leak up high---gas tank removal with
Good Post.
Way back in college days when I couldn’t afford much of anything and my 1975 RD-350 needed maintenance, I’d use a long handled socket... -
dadohead reacted to beenthere's post in the thread Spindle replacements for John Deere X380 with Good Post.
A couple pumps a couple times a mowing season, which is about 50 hours per summer. Does not need a lot.
-
dadohead replied to the thread Spindle replacements for John Deere X380.Ha... I've been retired 9 years. I dont remember. What does the owners manual say? I grease the spindles on my GX335 once every...