I have replaced the sump screen, changed the fluid, as well as a lot of hoses. I checked the pressure on the reverser and it was at 160 psi. I have been using the tractor for some time with no reverse or breaks. I finally got it in the garage. I pulled the top cove and checked the linkage to the...
I found some time to work on my tractor today, I pulled the sump screen and found it to be damaged. Its looks like both ends supposed to have a metal ring on the ends but one is missing. I looked into the sump and the other end in not there.
I also stuck my finger in the transmission drain...
I have dropped both filters, and located the correct plug. I was a little confused at first as the picture posted above did not have the nipple for the return filter. I had to order a 2" wrench, that will be here tomorrow, in order to remove it.
I too am having the same issue, My tractor is a late model JD300 with a reverser. I have no brakes and the pedal for the right brake is all the way down as if there is a spring collapsed on the piston for that side. Along with that issue I have no reverse, the lever seems to be stuck at the...
Thank you TX Jim, I just got the tractor home Monday, but I have had to work until today. I drove the tractor about 1/4 mile and let it idle for some time. I pulled the transmission filter housing and found the fluid looks like gravy. I also pulled the plug out of the relief valve (which I don't...
I just purchased a JD 300 and I am having an issue with the reverser and the brake valve not working. Could this be caused by the pressure control valve, or do I have another type of headache?