Recent content by Degolyerent

This is a Dearborn Folding Disc from early 50's. The back half folds over front to make a Bog Harrow. The back half is actually 2 sections to make picking it up easier.

Here's one that would be a mouthful for a single lid grapple

I just wanted to share a couple of things that has made trailer hauling a lot less hassle as I haul one many miles per year. The best thing was to get away from trailer tires and go to LT tires, mine are 16", and I use a bias ply tire and get good life from them. I am sure a radial would get...

This is some heavy brush I cut with a Landpride RCR2672, as you can see I had stopped to clean out screen.It was a 10 acre property, I give that cutter a hard time and it has done very well.

I found a 8' Gannon hydraulic rippers box blade for $600 on Craig's list and am going to look at it tomorrow. I notice it has a wore out blade on back but a new one is $130. It also looks to be modified on the outer lower edges. It looks like it had skid shoes added to it. I am pretty good at...

Florida law for weight registration

This is Valarie, she was bottle fed from her very first meal until she could eat on her own. She thinks she is human and that everything belongs to her. She is very smart and loves jelly beans. John

I am wanting to run 3 remotes of which 2 will run TNT set-up and the 3rd for future use. I am thinking about using a electric over hydraulic type solenoid valve and sub plate set up and use a Scorpion handle w/ 4 buttons for the TNT mounted on my up/ down control handle and a rocker switch in an...

Here is another angle, it looks like the handles adjust the angle of the disc. It also shows the front hook up a little better

I saw this on Craigslist and was wondering if anybody knows anything about it as there was no info on it. I am not interested in buying it but was just curious

1995 Dodge 3500 w/ 12v Cummins, automatic,4wd 130,000 miles 20' flat , 2' dovetail 14,000 lb trailer MX 4700 4wd Kubota

This is a cutter I bought cheap and reworked this past year, it works very good and was worth the effort I put in it. I enjoy reworking equipment,implements and trucks John

Adding power without transmission mods also can cause problems

This is what I found for dates of early and late model 99 superdutys John