Recent content by Delphicoder

  1. D

    HST Fluid Level after changing.

    So I performed my 50 hours of service on my B2920. Drained HST fluid from three drain plugs, and removed and replaced two HST filters. I let them drain until there was hardly anything coming out of them. Prior to removing the drain plugs, I removed the HST filler cap so it would flow out at a...
  2. D

    Gauges at night - B2X20

    I have not used my B2920 at night since I purchased it last year. Last night I went to use it, and noticed something odd that I can't really recall occurring on my previous tractor, a BX25. The instrument panel gauges light up as expected, but the needles on the gauges are not illuminated and...
  3. D

    Cut Pine Trees

    Last week end I dropped about ten good sized pine trees (lob-lolly I think) that are about 10 - 16 inches wide. I delimbed them all, and now I have the "logs", some cut to about eight feet, but most still the length of the tree. I was going to push them into the far woods and let mother nature...
  4. D

    Kubota Landpride Financing

    I thought about posting this in the buying section, but I thought it may be more beneficial here. This is probably old news to most, but it was new to me. I am close to purchasing a tiller for my B2920. I did not realize it but Kubota offers 0% financing on LandPride equipment (matched to the...
  5. D

    Tiller or Disc Harrow?

    Hi All. I recently cleared a wooded area for a garden, and took out a lot of brush and several trees. I used by backhoe to dig out the stumps and larger brush clusters. Next i took my box blade and lowered the shanks all the way, and made repeated passes, "ripping" up the mess of undergrowth...
  6. D

    B2920 - Must have taken it's vitamins

    I am not sure what happened to my B2920 today, but good grief it was like it was on steroids or something! I was digging up stumps most of the day and it was just doing it with ease. Maybe it was because they were different types than I had been working on before, I don't know. Maybe it had...
  7. D

    Kubota Hydraulic Pressure Guage Tester

    Can anyone recommend a good hydraulic pressure gauge tester? I want to check my pressure, and went to Northern tools, but it looks like you have to make your own there out of parts.
  8. D

    B2920 Versus Lots of Roots

    I have been clearing trees and stuff for a garden, it is going pretty well. However, after I get the stumps up, there are still plenty of roots all over the place:mad: I am not sure the best tool or method to get the job done. I am thinking just get a plow and maybe plowing will rip up some of...
  9. D

    BH65 - Grease Port Mystery

    So I was greasing my tractor the other day, along with the backhoe (BH65). All the locations made sense, except for the one if the photo. I can't understand why there is a pin there, since there does not appear to be any moving parts. I tried greasing it, but who knows where the grease actually...
  10. D

    B2920 Hydrualic Pressure Test Kit

    Does anyone know or have used the bxpanded pressure tester on a B2920? I would think they are all the same, but perhaps not.
  11. D

    BH65 Continous usage

    I was working on a seemingly normal stump yesterday with the bh65 on my b2920. It turns out that the roots for this stump were massive and hard to get in and dig. Well I finally got it out, it was big! However I looked at my watch and realized I had been working on it for two hours. It was about...
  12. D

    BH65 - Joystick Oddness

    Hi All. I hope this is not a dumb question, but probably is :) So I was removing stumps today and getting the hang of the BH65. Something felt odd and I was not really sure why. At first I thought it was just me, since I was used to my previous tractor BX25. Seemed jerky under some...
  13. D

    B2920 slow

    I have a new b2920 only about six hours on it. I tend to keep it in medium range. Yesterday I went to go down the driveway for the first time and wow was it slow going up hills. It seemed to be under a load. I pushed the rpm lever up to the orange mark on the gauge and that helped some at least...
  14. D

    Finally used my new B2920 - Good impressions

    I had to use the B2920 I purchased late last fall for the first real task yesterday. We had to put down an aging and sick pet, so I had to dig it's final resting place. I could tell a really big difference from my BX25. While using the backhoe on the B2920, it seems to have much more power (I am...
  15. D

    WSM Manual

    Ordered a WSM Manual from Messick's today for my 2920. :thumbsup: They had two in stock, real nice lady on the phone (sorry, can't recall her name). That should give me plenty of reading material! I ask a lot of basic questions on this site, so hopefully this will help educate me more, and...
Top