DennisfromCincy's latest activity

Is the fuel gauge showing past full with key ON? If so it may have an open in the wiring. For the Temp you might check to find the...

Just keeping all on the same thread. I added 2 stabilizers and removed the oe top link all together - vacant. That piece of oak kept...

Poison ivy - if it touches me I get it. I used to be on a plow crew and line crew and we have plenty of it in southern Ohio. Besides...

I relieved all weight from the tractor oe top link. I bolted the crossbar which is bolted both sides to the lift arms 1/2 inch bolts...

Completed. With the new top link, I took all the weight off the lower tractor top link mount then I put some back on maybe a third...

Agree, it would be nice to be able to reach the throttle. I can reach putting it in gear or neutral on mine. I do not have a chance...

I do not have a subframe with my Yanmar. Here is my progress, awaiting paint to dry. I have 2 - 1/2 inch threaded holes to complete...

The ROPS was used for the additional mounts in pic 1. Helpful pics. cool

In a "Hydraulics" thread another member brought up the possibility of damaging the tractor top link mount because of stresses of a...

First, er ummm couldn't wait until tomorrow to retry the PB loop. It works. I must not have actually reversed it the first time it...

Ok, well did that but I will try it again. So, you are saying the BH is open center but one way with the check valve? I will try...

As you suspect it only works one way.

As you suspect it only works one way.

Hi, I expect most new members join because of a question - me. I have a 2009 - bought new-- Cub Cadet EX2900 with power beyond of which...