Recent content by Dgross51

  1. D

    MF 5465 no start

    Starts only on ether, whether it is warm or cold, even at 75 ambient air temperature. Has new injectors, new supply and injection pump. Fresh overhaul, had low compression. Replaced crankshaft sensor, repaired faulty wire for the sensor to the ECM. Cranking speed is excellent. Once running...
  2. D

    New member MF 5465 will not start

    5465MF starts only on ether. Injectors are new, pump is new, engine overhauled. Will not start when engine is cold or hot on its own, always needs a sniff of ether. Crankshaft sensor is new, wire from sensor to injection pump repaired, was open. Is the ECM faulty. Codes that came up were...
  3. D

    MF 5465

    Will not start whether hot or cold, only with ether.. New injection pump and injectors. Fuel supply good right up to injectors. Compression is good. When turning over little or no smoke. Had same issue with old pump and injectors. Engine was then overhauled. 1106C 6cyl. Has Emc, with mechanical...
  4. D

    New member MF 5465 will not start

    I have same issue, ether start only. Will not start when hot needs ether.New pump and injectors. Compression is good. 70 plus degrees
  5. D

    New member MF 5465 will not start

    I have the same issue, it's summer, 70 plus degrees. Starts only on either. NEW pump and injectors. Compression is good
Top