dicktill's latest activity

Further, to update my first post regarding the steering gear, the system used on the Massey Ferguson GC tractors is used extensively on...

If the fronts don't exceed the rears the tractor (vehicle) will not turn worth a dang especially on slippery surfaces, snow mud, wet grass.

How easy is it to use? Will it work on a small front tractor tire (18x8.50-10)?

Another thing you could do is buy a second set of wheels and have R14's mounted on them. Then just use those for snow; in snow the ratio...

Those machines are descendants of the GC 1723E and GC 1725M and are good machines. There is a ratio in the gearing so that the front...

You can try these: For 1/2" ISO 5675 "AG" style couplers: Size = 117 Durometer = 70A Material = Buna N

@ray66v: Thanks for your message. Before I got and used the "staple gun", I tried welding using a heat gun and ABS filler rod that I had...

That is the fastest, but also the crudest way to fix it. I suggest using the hot iron method to embed some stainless steel screen on...

Voice control means the vehicle is always listening. To every conversation in the vehicle. And doesn't that technology require the...

I had a couple of cracks in mine, and I stitched them back together with a cheap plastic welding gun like this: Plastic Welder Kit...

I use the same! Never had a problem with "purging air" that so many report.

All I use since I got a lube shuttle gun. No mess, fuss or drips. Admittedly I do not have to grease a lot but if I was doing a lot of...

I said that I got six Saturdays every week. I didn't say that they weren't very busy Saturdays!

@Shawn T. W.: Do you have the missing/broken piece from the rear fender? If so, it can be stitched back together from the inside. But...

Looks like I retired in the wrong place. Since retirement, I don't get a day off.