DIESEL-FUMES's latest activity

This is the belt that John deer gave me. I thought It did feel tight when I first put it on. But now its loose. But that's going off of...

Thank you ! I have tried no load and Load on the pto manytimes. I also have taken the pto off to check everything out.. the deck itself...

I will check the belt tomorrow. If I remember right it has the part number on it.. the deck turns just fine. The big thing is the pto...

I did get one for the lx277 with the 48" deck. They did give me the right deck belt. But that doesn't mean that they gave me the right...

It also made the same noise with the old pto. I have taken the clutch off 3 times so far. I also felt the clutch after I shut it off...

To be honest it dont remember the part number on the belt.. I thought that I compared it to the old one and they where the...

The pto is a switch and I just put in a new oem switch..as for the paint..you are correct. That happened before I leveled the deck and I...

So here is the update. I put the deck back on and trippled check everything.. the deck soes move freely if I pull it by the drive belt...

Not that I could see..

Thanks everyone. Sorry I didnt get back sooner. Everything on the deck is 100% new. All new spindles. Greased properly. New main drive...

The slack on the deck drive belt..

Greetings..I will keep this as short as possible. which is pretty much impossible for me.. Anyways, I have a JD LX 277 that I bought new...