diesel85's latest activity

My 2002 BX2200 has only yellow safety pages in the OM. Always found that part interesting. LOL

Back to tractors ... Sorta! 😂 I got home today, and got my binder for the WSM ... For some reason somewhere over the last 20 years...

I have like 5 or 6 cheapy calipers. Both plastic and metal. But I also have two really nice Mitutoyo calipers in both analog and...

My 2002 BX2200 is exactly the same way. Only one plate. Over the years this has been brought up on here. I've seen it mentioned in...

My BX25 used to overheat regularly in the early fall when all the dry grass would clog just 20% of the screen filter which was enough to...

I agree with my 2003 BX2200. I think Kubota had everything perfected by that year. Then they went backwards for a few years using some...

The axle seals came out easily with a plastic pry bar and a couple taps with my fist. They are in there about as hard as a wine cork...

I run a 62" Woodmaxx Flail with Y grass knives on it, ran on my BX2200, and it does a phenomenal job mowing. I typically mow my...

If I didn't have a 50 ton hydraulic press at my disposal, that would be my alternative. It's funny, not to change the topic, but about...

I just replaced the rear axle seals on my 2003 BX2200, 850 hours a couple months ago. I suspect the age has as much to do with them...

You shouldn't have any problem running aluminum wire in your 210 machine without a spool gun. I have run 4043 aluminum wire in my...

I know, I only weld aluminum occasionally and when I bought the liner for aluminum, I ordered an extra one, so I could just leave the...

Really shouldn't run steel wire in your aluminum liner, the steel wire can be pretty dirty and leave contamination in the liner, which...

I have run aluminum in my Lincoln MIG welder. It has a Tweco gun and I ordered a Teflon Liner from my supplier and it worked well. If I...

I used to weld aluminum wheels for racing machines (before CNC made it easy to get wide stuff) with a transformer MIG; it was a giant...