Recent content by Dieselrider

Has anyone ever seen, either from Kubota or plans for DIY, extendable lower link arms for the 3pt hitch on a Kubota L3800? Being a compact with less room between wheels and such, this thing is much harder to connect and disconnect 3 point hitch implements to that my JD2640 that does have the...

I had asked a bunch of questions on here regarding adding rear hydraulic couplers to our L3800 and found some real good advice on this board. Thank you all who offered up their input. I had looked real hard at using the right side where Kubota has provided a slot for the spool valve arm and...

I have a 2013 Kubota L3800. We opted for the Loader and the backhoe. Both have been handy but, looking back I should have opted for the rear hydraulic outlets(at least one set). So, now I would like to add them. I have the one line that goes to the back for when the backhoe is installed. That is...

Does anyone know, since rimguard is non corrosive, does it need to be inside an innertube or can it be put inside a tubeless tire without a tube? Thanks

Where in the owner's manual can I find the filter numbers for my Kubota L3800 gear drive? I have been skimming through looking for that information but, not finding it as yet. Are the Kubota numbers on the filters themselves? Thanks.

It arrived yesterday. A brand new Kubota L3800 4x4 with the loader and backhoe. First new tractor I have ever owned. Also first compact tractor here. Will be getting familiarized over the next few months. Primarily use will be truck patch type gardening and general maintenance on the farm. Is...

I have an old AC and John Deere two wheel drive tractors now but am wanting to trade the AC 6140 in on a 4WD that is more sized to what we need for vegetable farming. Main use would be pulling a plastic mulch layer for vegetable farming as well as a water wheel trans-planter for the...

According to this thread on the last post,http://www.tractorbynet.com/forums/mahindra-owning-operating/258302-mahindra-3616-oil-filter-2.html The oil filter is hard to reach on the 3616. Is this correct? Any other owners having any issues with this? Thanks.

How easy/ difficult, time consuming is it to connect/ disconnect the backhoe from Mahindra tractors? Is it just three point hitch only or are there hydraulic lines that need unfastened? Quick connects or wrenches involved? I am looking at a 3616 model if that makes any difference. Thanks

Does anyone have any thought on the new T-4 emission standards that are coming out next year. Supposedly it will add $4-5K to the price of just about all the CUTs being sold. Is the newer emissions good or bad from a power and owner standpoint? Will the engines likely wear out sooner or be lots...

Would this tractor handle a 6 foot Rotary Mower?

We are considering a new tractor in the future ( next few months to a year) and we were very interested in the Max 28 as the power is close to what we need (could be a bit higher) and dimensions fit what we do (vegetable gardening) well for row spacing, for cultivating etc. However, I saw on a...

I am supposed to go look at an IHC 254 this coming Monday but in this weeks bargain paper I see this ad for a 2cyl Yanmar diesel. So I called the fella. I was talking to him on my cell phone while I was at a farmers market so, I couldn't hear everything well. I did not catch a model number...

Looking at one of these. 3 cyl. diesel two wheel drive. Does anyone have experience with these? Could you pass on the good, bad and ugly of them? Thanks