dieselscout80's latest activity

I did ours in 8X24 sections. And I had a crew... my wife, daughter and her fiancé. 🤣 Surprisingly, they learned very quickly. All I had...

You need more training watching young grandchildren on FaceTime. 🤪🤓🥸

On these IHs like the 414/424/444/384 the clutch has two stages the first stage stops the movement of the tractor. Then if you push the...

When engaging the PTO I have the tractor at idle, depress the clutch, and engage the PTO. If depressing the clutch does not prevent...

OK, I finally got around to doing this. I decided to divide it into six strips, each strip was 33" wide and 10'6" long. I ripped 4"...

I just successfully installed the NAPA KS 6600 switch in my 2005 NH TC29DA. As suggested, I connected both red wires (B&D) to BAT, one...

I would look this thread over as the originator got it working. https://www.tractorbynet.com/forums/threads/tc45da-ignition-switch.195255/

I occasionally make up hoses for various purposes, and although I rarely have a problem with them, some of the ones using braided...

My FiL had to different disc seeder he had built for farming to plant wheat and soybeans. He also raised rice a few years and I think he...

I just put new belt on it. I guess it may be worth dropping out and changing the oil and maybe sanding the mating surfaces.

I don’t know for sure but I mow in low range with the electric shifter in high which maxes out at 5.95 mph and I try to cut with the...

Well we bought a Husqvarna YTH24K54 back 2013 and mow more than two acres in SC so mowing season is long and it has 623 hours on it. It...

Here is a picture of yard mowing with the Y knives. I put my last two new Y knives on, so it won’t be too long before I need to switch...

The hose is the cheap part. You are paying for the fittings at the end of the hose. $150 seems expensive to me. I own an old backhoe...

You might get a hydraulic hose made a bit cheaper at a hydraulic shop, but most of them keep Monday to Friday operations and 8:00 - 5:00...