Dinico's latest activity

Good morning all, I'm thinking the best course of action is to retrace or redo what caused the hydraulic fluid foaming. It wasn't...

Hope it's not the PTO clutch. That is above my pay grade. I did some "pseudo-mowing" as you calles it. Moved some bucket loads of...

Never had any foaming issues prior. 1st time I've ever seen foaming was after the noise went away then came back. Only foams when...

Long story short. Tractor 650 hours. I bought with 400 hours. Maintained, scheduled maintenance since I owned it, garage kept, only...

Your right. The plastic ones can break easily if over-torqued. Broke it shortly after getting the tractor. That's been about 4 years...

Like 3 to 5 minutes on the first start of the day. Rest of the day when starting, I let the tractor build some pressure for a minute...

Update after checking things over. No leaks found. Went out to mow and after taking a couple of passes checked the hydro level to see it...

I have witnessed a potential clue to what's causing my excessive hydro whine. But not really sure why it happening. Today, when my...

That could be very possible too. The Viscosity Index of the hydro oil is 145.

I was trying to determine if I was missing something and if anyone had cleaned the "line screen" or replaced the PTO clutch engage lever...

I had actually read your post a couple of times previously. It was one of the only mentions I found about the "line filter" after...

Thanks for that advice. Thanks for the advice. After some research, just on the hydraulic filter I found that there are a few...

Here's a bit more info on this line filter. From what I've found, nearly all GC series tractors have this filter and many other MF...

Hi, long time reader, first time poster. I have a GC2600, bought used with about 400 hours on it. A great machine. Now has 650 hours. I...