dodge man's latest activity

I’ve got one of those racing jugs and I have the elbow for it that puts a bend in it but I hadn’t seen the add on with the valve. Looks...

I use 5 gallon "utility cans" with a big screw on cap. Put one of these through the treads in the center. Use the valve to regulate...

It’s more of a car detailing thing but they make these Q tips of different sizes. I have a bag of different sized ones, small to giant...

That's why I'm bumping this up on the priority list. I'm basically putting over 5k on the front axle which is a no-no. So far, I've...

I’m going to say 1000 pounds minimum, 1500 might be better. The owners manual might say. If your tractor will lift it and almost be...

That’s a lot of Akitas, beautiful dogs.

I rechecked the fuses. One was blown. 🤦‍♂️ Thank you all for jumping in to help. All is well. Anybody care to hear how much worse it...

I’ll beat a dead horse a little more. I bought on of those nozzle and vent kits from Amazon and installed them on my diesel cans. With...

You obviously need to keep it somewhat open for heat transfer.

Just checked my New Holland manual. Calls out for tractor fittings every 50 hours. Grease tractor once a year which is 30-35hrs./yr...

The 50 hours is for fittings on the tractor, 10 hours is for the loader. Look in the separate loader manual.

You sure it says every 50 hours? I owned a smaller Kubota and it said 10 hours but of course I don’t have your maintenance schedule in...

You’re joking right? You use your tractor 30 hours a year so everyone should grease theirs once a year? You realize some people put 30...

The first thing you need to do is power wash that thing

The first thing you need to do is power wash that thing.;)