Recent content by Donegal_TDI

http://m.youtube.com/watch?feature=youtube_gdata_player&v=hxprYUwwTSM May be of interest, ground very wet here, needed way of keeping Sheep and baby lambs from getting mixed up after birth.

Other than the dealer, is it possible to download a workshop manual in pdf format? I will talk to the dealer in a few weeks, they are a 3 hour drive away. Thanks.

YouTube - Kioti 551C feeding cattle on farm of Gerard Gallagher It's not a John Ford classic, but you get the idea :) I have a weight made up for the rear but so far don't need it. As I get further into the pit over the winter, the silage will be tighter requiring the use of the rear ballast...

At the rear left top corner on the exterior of my cab there are 2 wires with a connector for a beacon. My question is do any of you have a beacon fitted by a dealer and where internally was the switch fitted in the cab. This might point me to where I can install a switch and pick up the...

Got the little tractor home last Wednesday evening, torrential rain in the dark going home, hairy trip but made it safely. As promised some pictures for you.....

Those of you that saw my other post.... http://www.tractorbynet.com/forums/kioti-owning-operating/184397-urgent-has-kl1590-loader-problems.html ......are aware that I was interested in this tractor. I drove a 400mile round trip to view, and while it will suit many, not me. Bit too rusty...

URGENT - Have the KL1595 loader problems been solved? Hello all, need a quick reply to this. I have been looking for a small to mid size Kioti with FEL to feed cattle during the winter. Have come across this...... LYONS & BURTON LTD. - John Deere dealer The Mount Clane Road, Kilcock, Co...

What words of wisdom do you lot have for removing this thing, took me an hour last weekend to do something that should have taken minutes. Was very very tight, first oil change. Chain type oil filter wrench I have kept slipping on it. As access is restricted, what wrench do you use? Thanks.

Y'all probably thought I had died or something, but I vastly underestimated the amount of time it would take to do the work to my new Gator which I got last Xmas. I vowed it would not go out the door until I was finished. It will be my main transport, and travelling office, on the farm. I work...

Sit back, guys and gals, put up your feet, get several cups of coffee and watch and listen as all your ATV topics are discussed, all the stuff we trawl the web for in one place, brilliant, liquid gold. Polaris ATV Maintenance & Repair Tips | ExpertVillage Videos Lots of stuff applicable to...

Anyone know if the guard (above) fitted to the 2008 models to cover the handbrake disk, can be fitted to 2007 models? I was thinking of making a cover for this anyway. It would be handy if this was a simple bolt on job.

In particular, Honda or Arctic cat. Honda do not have a proper rear differential. The rear axle is solid inhibiting tight turns. Gets worse when towing a heavy load, ATV does not want to turn. A proper rear differential, that could be locked when needed, would be ideal. Anyone?

I got the HD struts from the JD dealer last Mon evening, fitted them last night, plus an extra 1" of lift with spacers. This really levels out the Gator and it now has a nice stance, with the 26" Bearclaws fitted. The original struts barely had an inch of travel left with the unit sitting empty...

Anyone done this? How about a step by step guide for the HPX/XUV diesel? Are they the same? Nothing in the handbook for this, just go to dealer for it, and I don't go to dealer unless I'm really really stuck. Thanks.

OK, strange title, but all will be revealed. Was at Local JD dealer yesterday evening to collect a JD cart for my little fella for Xmas. They told me a pallet of stuff had come in for your gator. They loaned me their flat bed trailer to take the stuff home. Overjoyed at this, when home, I...