Recent content by Eagles eye

Noticed an oil leak coming from front of 4wd shaft and when I pulled the plastic cover it is obvious that its coming from around the output from the drop box that drives the 4wd shaft. Before I take it apart is there any warnings or things I need to look for and is it a simple driven yoke seal...

Just changed the oil on my 8n tractor. When I removed the drain plug, I noticed that the screen was not above the drain hole. Upon further inspection the screen, housing and tube were just laying loose in the oil pan. Thought it must have been this way so I filled with new oil and when I started...

Looking at a 1998 gator 6x4 with dump bed, Diesel engine , hard full cap with heater, 2100 hours. Looks like its in good shape with no signs of abuse. Used on small farm. The guy is asking 3750 for it and I plan to look at today. Anything I should be aware of on these and does this seem like a...

I am looking at. Gator that is 1998 with 1650 hours. It's a 6x4 with a enclosed cab, dump bed and Diesel engine. Is in very good condition..not beat up. Any idea what it's worth?.?

Well, I have removed the cover on the front wheel drive shaft and the front portion where it hooks to the front diff is spring loaded. I depressed it and the shaft came away from the front spline. Two issues....when I move the front spline it is engaging the front wheels so I will assume the...

Hey gang My 1720d is working out great but I have a problem that requires your collective wisdom and guidance . I have an output seal in the drop box that is leaking slightly so yesterday, before ordering the seal, I raised the unit up and realized that the pto was not turning when engaging...

It's purchased this tractor with a loader, diesel engine and 4wd. ($4500) at an auction. Everything works well but when I went through and changed all the fluids I noticed the trams was a little low. After changing and bringing to proper levels I ran and worked loader for an hour of so. The only...

It's purchased a MF tractor from a guy who is moving. Don't know what year or what model it is. He said he thinks it's a mf50 about 62-64 year model. He got it with the farm when he purchased e land and has never used it. I did change the oil, turn over by hand and started. Is a 4 cylinder gas...

Looking at a 4wd kabota 2400 with loader that has 1200 hours on it. Sounds good, no leaks and everything seems to work as it should. Can get it for $5,700 so I am looking for advice on the hours? Seems high to me for a small unit and I would like to know your knowledge of these and life...

Ust bought a 1963 MF 35 and it has no tach or evidence of ever having one. Anyone have any history on this? NR Eric owned a tractor with no tach.

Hey folks I just purchased a 1963 mf 35 and am looking at a ferguson 236 front end loader. Wanted to know if this will work on my tractor and if not what kind do I need to purchase. Thanks!