eKretz's latest activity
-
EeKretz replied to the thread 20 years operating the X495 and learned something new.My x595 disabled *itself,* lol. The RIO switch failed to short. Can't say I've worried about it. I still pull up on the switch when...
-
EGet a piece of board 2-3 ft long and use the board to show oil spray. Use a board the length suggested to keep fingers(use gloves to)...
-
EeKretz replied to the thread Goats for a clean pond?.Pretty sure he was referring to the beaver being allergic to lead... 😄
-
EeKretz reacted to Fixastuff's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
Or when it’s 0 degrees out side. -
EeKretz reacted to RjCorazza's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Doesn't have to be big... My Kubota ZD mowers have 21 grease points each. The electric grease gun with LockNLube tip really helps. On...
-
EeKretz replied to the thread Grease - is there no better way? Can we talk about this?.An electric grease gun doesn't have a huge benefit for most homeowner size machines. But get a BIG machine like an industrial backhoe or...
-
EeKretz reacted to kenhar's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Regular maintenance, greasing, changing oil, and checking air pressure in tires is the life of a machine. The electric grease gun is...
-
EeKretz reacted to gckshea's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Buck up, Buttercup. Not really anything but a First World problem.
-
EeKretz reacted to Squirrel's242's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Not necessarily. The pistol grip manual models allow one handed pumping. I'm one handed and aint got a choice to use two. But point...
-
EeKretz reacted to just_Dave's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Not an expert but was in another thread reading the type aka makeup of the grese needs to be compatible with what is already in the...
-
EeKretz replied to the thread Grease - is there no better way? Can we talk about this?.I have a DeWalt electric grease gun and it has been great. I'm not sure why some guys make a big deal about whether a gun is manual or...
-
EeKretz replied to the thread Grease - is there no better way? Can we talk about this?.Lots of differing opinions here, many of which don't take into account the differing states of equipment. One guy says I only use 2...
-
EeKretz replied to the thread Gas Shutoff's.Oh, and for cleaning out the problem, the only way is to pull the carb and disassemble it down as far as you possibly can into separate...
-
EeKretz replied to the thread Gas Shutoff's.Whether this happens or not is very dependent on the conditions. One, how well sealed the fuel system is. Note that it almost never...
-
EeKretz replied to the thread 445C pops into neutral.Fred, assuming that you're talking about the shuttle here, and not the actual transmission gearshift. Check the current that your shift...