Recent content by elvi

Howdy; Finishing out my polebarn. I am installing a pair of 10 foot sliding doors. These rails These hangers Will fab the doors out of C channel. How do you suggest I seal the sides and bottom of the door? The shop will be heated \ cooled. Suggestions for latches? Thanx!

I need to replace the lens on my safety tail lights (Tree limb) W hos a good vendor for mail order? Thanx

So; I bumped the loader valve lock arm, but moved it back. It did not strike me that I have it in a "locked" position Now, the bucket is "locked" but I can still move the loader arms up and down. Any suggestions?

Howdy; My Jinma chipper has been modified to point of being safe and useable and now it's time for a Log Splitter. I have a NAA Ford; with a hydraulic port under the seat. I do not see a return so I assumed it was designed to pass fluid when you threw the lever, and let it return when you...

Howdy; I have about 3 "work" hours on my Jinma 6inch chipper. (Probably 5 hours of spin time). I flipped the blades and the bed blade just for fun, and it is chipping very well. How many hours do you typically run a set of blades? I chip soft Ball Juniper (Cedar). The post get saved so it...

Howdy; I posted this in "Attachments" but was not sure if it was the right place. Is this unit a real Jinma chipper? LINK Why would want the unit listed above VS another vendor of the similar layout? I have spent around 20 Hours on this and other sites researching the generic design and I am...

Howdy; Is this unit a real Jinma chipper? PTO Wood Chippers » Buy Wood Chippers: PTO Wood Chipper Shredders & Automatic Feed Wood Chippers Online Why would want the unit listed above VS another vendor of the similar layout? I have spent around 20 Hours on this and other sites researching the...