ericm979's latest activity

If you had a PTO you could run a 9" Woodmaxx chipper. They're reasonably affordable. It takes some HP to chip the larger stuff. But...

Lumber costs are only a part of the cost of a building. If you're getting older the equation changes to where an extra $30k or whatever...

yes No 275 is plenty tall enough at ~46".

It's cool that you kept the water tower. Those used to be common where I grew up in the very east east bay area (a ranching town). But...

I'd put them on the grapple between the quick connect and the tee to the lids. When I add them I set them up to restrict flow out of...

I've got an 8" Woodmaxx chipper that I run on my 3725 (32 PTO hp). My stove does not like to burn Doug fir and we get plenty of...

If it's moving the lids too fast you can add restrictors to slow them down. You'll still get full pressure for clamping objects.

Neither a three or an in line four cylinder engine has perfect balance. Both have secondary imbalances. The three is worse, so triples...

Biocide might kill the algae or retard its growth. But it won't help an existing clog. If the filter is clean you need to check the...

How the heck does the 3rd function have a chip? It's a simple solenoid valve. <25hp machines don't have EFI or ECUs, they're all...

Based on differences in mortality rates it looks like more people died from covid than the official covid death numbers. The spread...

Semi chisel chain will stay sharp longer than full chisel when cutting dirty wood, though when sharp it does not cut quite as fast as a...

I did the same when I ran lines from a rear remote up front to run the grapple. But connecting the grapple's hoses together when you...

Sorry, I wasn't clear. That's without a turbo. The higher you go the lower the air pressure. So there's less pressure pushing air...

The hydraulic retraction is pretty slick.