etpm's latest activity

  • E
    My Yanmar 2310 does not have glow plugs but I have been told many times to never use starting fluid in my engine.
  • E
    That blood clotting gauze is fantastic stuff. I hadda use it for the first time when I sliced a 1/8 thick chunk off of my finger. There...
  • E
    Today my son showed up with a 3PH complete with a hydraulic PTO. The motor is rated slightly higher in GPM than his machine so I guess...
  • E
    I think I got the model number correct this time. Anyway, my son got this machine for 900 bucks. It had a bad hydraulic oil leak. It was...
  • E
    etpm replied to the thread How to get rid of Hornets?.
    Chlorinated brake cleaner will kill them instantly in my experience. If they are flying and you spray them they will drop out of the...
  • E
    etpm replied to the thread Son is buying a Bobcat, advice?.
    Me too on being skeptical but the owner is past 70 years old, is downsizing, moving, and doesn't want to deal with a broken machine...
  • E
    etpm replied to the thread Choosing my First Tractor.
    I have 10 or 12 acres but only about 2 of that is cleared and maintained. My tractor is a 1980 Yanmar YM2310. It is only 2WD and I have...
  • E
    etpm replied to the thread How big of a PHD?.
    I only have a 9 inch auger and I use it to plant all my trees and bushes. I drill about 3 feet deep and widen the top of the hole...
  • E
    etpm replied to the thread Drone repair options?.
    ABS is a common plastic used in all sorts of stuff and I wouldn't be surprised if your drone arm is made from ABS. You can test this by...
  • E
    etpm replied to the thread Gas Shutoff's.
    Even 30 years ago gas stations had water removal filters. Back then Arco stations in the Seattle area had a very bad reputation for...
  • E
    etpm replied to the thread Gas Shutoff's.
    Fuel quality varies from place to place. It's not always the fuel supplier to the gas stations either. Years ago I filled my VW bug at...
  • E
    etpm replied to the thread Son is buying a Bobcat, advice?.
    My son told me the model number today and he said it was a 753. The manual states that the machine is equipped with a Kubota v2203-b...
  • E
    etpm replied to the thread Son is buying a Bobcat, advice?.
    I'll find out.
  • E
    So my son found a Bobcat with about 2500 hours on the clock, a Kubota 4 cylinder engine, 10 to 15 years old, and a pretty severe...
  • E
    etpm replied to the thread $11,000 Water Bill.
    I dunno. Maybe if he used the well his city water usage would drop enough for the city to notice. Eric
Top