Recent content by farmerwantab

Hi All, I was wondering if I'm missing something or not... where my top link should mount I have (2) 4-bolt cast brackets about 10" apart w/ 1" hole in them. Am I missing a bracket or does the top link just slide on to a bar that spans those brackets ? Any help would be appreciated or pictures...

Yes I'v been there and thought I remember reading that the loader was 20 GPM @ around 2000 psi. The hoe only needs 5-7 gpm @ 2000 psi and I don't really know how to plumb the two together that's why I thought of the PTO pump and teeing off of the lines at the valve. I have a pic of what I mean...

I'm still trying to get this backhoe attachment to work good, and wanted to know if there was a separate pump for the 3 point and remote hydraulics. The reservoir is in the torque tube from what I can see, and the valve assembly is above the torque tube, but is there a separate pump or does it...

Hi, If anyone has a tractor like mine I could use some help. after having a cylinder rebuilt on my 3 point hoe I now have no hydraulics at all at the rear hitch. I don't know if the rear is seperate from the loader hyd. and low on fluid or if its just air but I'v been trying to bleed it all day...

Hi, I'm a new member and I had a question, I'm trying to hook up a woods backhoe to a Case 530 Loader only with a 3 point hitch and I'm not sure where to hook the hydralic lines to. It had two remote fittings at the rear that the manual says were for a cylinder, I hooked up to them but when I...

Hi, I'm a new member and I had a question, I'm trying to hook up a woods backhoe to a Case 530 Loader only and I'm not sure where to hook the hydralic lines to. It had two remote fittings at the rear that the manual says were for a cylinder, I hooked up to them but when I pull back on the rh...