Recent content by Fastball714

  1. Fastball714

    Kubota B3350 wont start.... AGAIN

    Yes JWR there are several. His post said he could not locate the PTO safety switch. That's why I posted. He said he already checked the neutral and seat safety switches.
  2. Fastball714

    Kubota B3350 wont start.... AGAIN

    I have a B3300 and I'll show you where my PTO safety switch is located.This is left side, if you're sitting on tractor.
  3. Fastball714

    12’ Batwing - can my L6060 handle it?

    I pull a 11' finishing mower with a L4060. It does a great job. It does slow down a little on this one hill, but it maybe the anti stall.
  4. Fastball714

    New Kubota Corrosion

    I think the dealer washed your tractor and has caused this. I would go there and ask some of there customers if they have this same problem. They could have sprayed some de-greaser or cleaner that has caused this problem. I'm sure new inventory is cleaned up prior to delivery. Maybe someone made...
  5. Fastball714

    94 B3300 won’t start

    Is your B3300 hydro static drive? If so, the forward and reverse pedal have a tendency not to find the neutral position. There's a safety switch on there that a rod pushes in. It tends to get dirt in the piece that the shaft travels through. Here's a photo. Check to make sure it's pushing the...
  6. Fastball714

    400 hr service on a L4060

    I did my service today. I tried the pump and was only able to remove about 4 gallons. I removed the drains on each side of rear axle one at a time and was able to control the flow without making a mess. These were 14mm bolts. I drained my oil pan after each one. There's a larger drain, 24mm...
  7. Fastball714

    400 hr service on a L4060

    I have one of those pumps that I used to transfer diesel at one time. I'm going to try it. I agree that it's expensive to change everything at 400 hours. I paid a lot for this tractor and want it to last a long time. My local Parts store will take the hydraulic oil and any used oil.
  8. Fastball714

    400 hr service on a L4060

    Thanks for all the replies. I'm going to change mine in my shop and save a few dollars. I have the hst model. I had watched a video on a smaller L model that had 4 bolts, but only 6 gallons.
  9. Fastball714

    400 hr service on a L4060

    Has anyone done this service on their L4060? I'm a little worried about changing the hydraulic fluid. Dealing with 11 gallons has me concerned. It drains from 4 points and was wondering how much would flow from each drain. I didn't want to have oil all over the concrete because my container was...
  10. Fastball714

    Tiller for my b3300su

    I have a B3300 with a 6' tiller and have no issues with it. I'm in Georgia. It works great if the ground has been worked the year before. My garden dirt look like sugar, when I get done.
Top