Recent content by flyingace43

I also had the woodland mills grinder and it is a good machine but it this video they are only grinding old rotten stumps there is a big difference when you grind a fresh cut stump it takes a lot more power and a lot longer. If you only have a few small stumps it will work fine but if they are...

I had a 37hp JD that I ran a stump grinder with and it was just barely enough power or weight for the job?

Have a Yanmar YT347 but I did look at the YT235 and they are great tractors if your dealer is ok I would give them a hard look. Good luck

look at the Yanmar YT 347 (westfieldagandturf) great dealer easy to work with and not far away in western New York

Had a 2022 Case 45C cab and it was a nice tractor and it is the same as the LS but I traded it after 8 months and bought a Yanmar YT347 cab with the IHMT transmission and it is much nicer than the LS (case) if you have a dealer nearby check them out.

The case 40C,45C and 55C are the same as the LS and new holland and they all use the same motor just turned up to different HP and nice tractors and much less than the Deere but for about the same money you can buy the Yanmar YT347 which is as close to having a deere as you can get but for a...

Had a 45C hydro with a cab and yes it is an LS and was a nice tractor but after I drove a yanmar YT347 with the IHMT tranny the power difference is like night and day. It is like a gear drive but operates like a hydro. Cab is also more user friendly and sold by the same dealer so that made the...

air grease guns are junk I have one I will give you......bought a hercules battery powered. grease gun from harbor freight with a 5ah battery and the charger for $120 best money I ever spent. Between the tractor and my F550 dump and my stump grinder I have a lot of fittings to grease also have...

I have a new Yanmar YT347 with the IHMT transmission and the difference between my case 45C and the yanmar is night and day. They also make it with a 59hp the YT359. It has a clutch but you do not need to use it it operates just like a hydro but has the power of a gear drive and they are priced...

I have a set of forks from Express steel in Indiana. and I got the 42 inch ones and they work fine seem to go on sale often for around $775

you are asking for trouble these are not even close to be able to tow these loads so go buy a F150 or a Silverado or a ram a little car is not going to get it done

I have had both line-x and rhino and it seems that the rhino is a little softer and tends to gouge when you push sharp objects into the bed and the line-x is a little harder but if you were to damage your bed you can remove the rhino by peeling it but the line-x is hard to remove. I think they...

I have a 10K 20' legend equipment trailer which I have had for 2 years I haul about #7500 on it and I have not had any problems so far but I will keep checking it on a regular basis. I don't use on a daily basis but so far I'm very happy for what its worth.

some of the attachments you can buy are made for the Deere system I bought a grapple from titan that fits on my loader

The amazon cult has sucked in a lot of people 9 out of10 times EBAY is cheaper and free shipping I still buy from amazon once in a great while but most of the time its better on EBAY