Recent content by flyingcow

I have a NH TN75 with an older nh 918H flail.92 inch. New knives on it. Flail is counter rotating motion. my tires R1's fully loaded. I am curious if I lowered my tire pressure would itt have less of an impact on the grass? the grass is not cut at the same height where the tires are tracking...

Bought a new Lucknow pull type/inverted snowblower. 7 1/2ft unit. My NH TN75 does a good job with it. It takes a bit getting used to, but makes life a lot easier. Still have my regular 7 1/2ft unit. Will keep it for another year or two. So far waded snow up to the belly of tractor, still pulled...

It's 86f and I'm on here thinking about next winter.......got to be prepared. :thumbsup:

I'm curious of anyone has owned or had first hand experience use of a pull type blower? I own a 4 wheel drive NH TN75da. I now have a typical 3 point mounted 7 1/2ft Lucknow. If I could stumble across a pull type (used) cheap enough i might buy it. I understand that it's not ideal, but in less...

looking for a good strobe light/beacon with a protective metal cover. I tend to have a few tree limbs rub the top of the cab when bush hogging. I don't want a plastic/composite cover, but one made of steel. May end up having one made. Any thoughts?

I just spec'd out a ford crew/6.5 ft bed with the tow package. 3.73's 11,200 rated tow capacity, etc. 1/2 ton, eco boost, etc. As i have posted earlier, i will be maxing out the tow capacity, but i don't tow very often. Or will i need to go any where in a hurry. but i am tired of riding around...

+2 for the GN

i am in the position of needing to update pickups. i have a 2006 Dmax,3500 crew, 8ft bed, SRW. I really only need the pickup to haul my 26ft GN 3 or 4 times a yr(8,000lb tractor), inside of 20 miles. i really want a 1/2 ton ride most of the time. I am leaning towards an big liter 1/2 ton and...

I've got a BIL thats looking at a(2003) 33hp JD. I do not know the model number. Factory cab, front mount blower, etc. He would like to know if 1500 hours is anything to be concerned about. Any thoughts? Thanks. Go Blue.... sorry couldn't resist.

Go Blue!! Heater, radio and ride.

Got the cab cam all installed. Love it snow blowing.. It will take a bit of getting used to but the thing is nice. Real impressed with the night vision, not that i'm going to ride around with my lights off. A big thank you to 4-Shorts for recommending it. Nice to have someone already tried and...

Whats the brand name of the oval strobes you mounted on your blower? Grote? Trucklite? Back up camera- I know i asked you this before, but do you use it alot when snowblowing? Thanks.

Sorry not a deere, but it's about the same size tractor. The Gn is a 22ft plus 4ft beaver tail

FWIW- I go from farm to farm picking up milk with a tanker..... Ridge- how long of a drive you have? If not a snowblower, than a FEL mounted blade?

Looking at a subframe mount 8ft plow from Michigan Iron and Equipment. Been doing an email conversation with them. They seem to know what they're doing. It's called a Hound Dog brand of plow. Anyone have an experience with these? Do not want to get into a brand fight. But who else offers...