Recent content by Fpf

Thanks for the detailed explanation.

Ptsg,, thanks for the explanation. So why have the valve? Is it's only function to control the 3pt drop rate speed?

I'm new here, so I have please bare with me. I have a 1025r with a loader. My question is. With balance weight installed while doing loader work should I lock the weight in the up position using the valve? I'm thinking that by doing so, it will keep the hydraulic pump from having to...

Dodge man, that worked for locking the deck. Thanks

Thank you! I'll check that in the AM.

Is there a way on the 1025r to lock belly mower lift mechanical in the up position when the mower is removed? Thanks

So, after doing a little research I decided to try some adjustments. Removed the left rear tire and adjusted the slide bar so there is no gap on right side. Then I adjusted (shorten) the two couples that lift the deck. Now the is about an 1"-1 1/2" clearance on the mowers front skid plate...

I just purchased a 2022 1025r with a 54d autoconnect. With 3pt lever all down, know in connnect position. The deck connects. Moving the 3pt lever to raise the deck, it only moves up 1/2" - 3/4". With mower removed, 3pt lift in the most upper position. The lift arms for the mower have about 2"...