Frank R's latest activity

Did some more thinking. I am going to install foam under the concrete anyway. I will need to put down mesh as well. So all that is left...

But what about an insulated but unheated floor? Quicksandfarmer has a point. I already have a Modine Hotdawg ceiling furnace that...

Michigan adopted the new building codes a few years ago. I have to build my walls with 2x6s to account for the extra insulation. I am...

Updated my location.

I will have to look into Mini Splits to see if they are suited for our area. I know that heat pumps are not ideal.

The forced air furnace heats the shop quickly but the floor area remains cold. I had a friend do my drywall finishing in my old garage...

Thanks for the analysis. I guess I should have added this to my plans: This radiant heating system in my shop floor will probably only...

You are fortunate. My current unheated garage is very uncomfortable in cold weather.

Thanks Carl. I thought you were implying that the AC would run through the floor tubing. That is not recommended due to condensation...

Thanks for the photos. Wow, you put tile in your pole barn? Never seen that before. Do you have a finished photo?

Hmmmm . . . . I thought I was pretty clear in my post that I was planning on putting foam under the concrete.

Thanks. Heat Sheet. Both are Canadian companies. I see a pattern here. Trying to find a local supplier. Will have to wait til Monday to...

Well, my research so far has brought up Hydrofoam panels and Radiantec manifolds.

Long time lurker but only my second post. I moved into a new house last year. I am planning on adding a 24x32 extension onto the side of...