Well it's been long road to get my tractor going again.
Here's a list of costs for the route I took, don't know if it was the best or cheapest just the way I went.
$315 for "good" used motor on e-bay
$270 to ship motor half way across the states
$250 for parts from Hoye tractor parts
$122 to...
I got a new used motor for my 2000. I bought it on ebay, it was out of a 240.I finally got it shipped through "discount rate freight " trucking brokers what a NIGHTMARE!!! I do not recommend this people, thats a whole other story. I got the motor swapped into the tractor but the front intake...
Hello TBN
I am in the process of trying to rebuild my ym 2000. I have the IT shop manual that covers the ym240, are the specs for motor wear limits and clearances the same?
Thanks Gary <><
I have a yanmar ym 2000 that will not start with out the help of ether. I am afraid that there is major damage to the engine. Let me give you alittle background on what has happend. This spring I was at the neighbors house doing some tilling for his garden and I was working the tractor hard. the...
I have ym 2000, the oil presure light would come on and flicker intermitly and then stay on. I had the same problem with the temp light and i found a short in the wiring, repaired the wire,problem went away. I inspected the wire to the oil presure sender and could not find a short so I put a new...
Does anybody have a cross referance on ym 2000 temp sensor. I thought I would just go down to Napa and get a new one, but they nor anyone else auto or tractor in town could come up with a match. I think a read a post quite awhile a go about puting gauges on, any thoughts or ideas would be a...
Is a slip clutch a good idea on a tiller?
There is one on e-bay a kabota slip clutch. I was wondering if it would work on my yanmar tractor and tiller? does a slip clutch protect the pto on the tractor and the gear box and tines on the tiller?
Thanks Gary<><
I just bought a Yanmar RSB1300 tiller for my ym 2000. Nice looking piece of equipment, with lots of wheels, levers, and cranks. But to my dismay when I got it home and tried to hook it up to the three point on my tractor it seemed as though the top link was way to long the bottom arms way too...
I have a ym 2000 with a small fel on it. The front tires are bald and weather checked real bad. The tires are bridgeston farm service 4.00-15 on the front. The rear are 9.5/9-24 bridgestone farm service lug. Are these what are called rice tires ? I do loader work and have a scraper blade on the...
I know I need to buy owners manual for my tractor, but here goes can you tbn'ers tell me how often to change the oils and filters and other important items. I have 35 hours on the tractor since I bought it and went through what I thought needed done. I figured it was probably time to do it again...
I am thinking about buying a ym1900d I have ym2000 that I am happy with this 1900 has fel same as mine but needs some work the hp rating seems to be lower. How are the parts availablty for this model? Any other comments are welcomed. thanks
I have a ym2000 I bought a air filter from Napa 6024 I think.
they did not have a cross ref. on the yanmar filters the old one had alot of metal on and around it the new one is all plastic. they matched on size. the problem is i have found dust on the inside of filter as it is not sealing...
I have an oil leak on the front of the tractor, it appears to be leaking out from around were the hydraulic gear pump is attached to the front of the motor. I believe it is motor oil.It looks like it just needs to have the pump pulled and a new gasket installed. 4 bolts no biggie just wondering...
I would like to buy a or some books for my ym2000. what would you recomend, owners manual, parts, service. I like to do all my own wrenching so I am thinking service. Who are the best sources and are the US versions ym240 the same?
Thank you to all members who respond present and past posts...
Hello everyone at TBN. Thanks to all for info. I want to buy a box scraper or blade for my ym2000. It has a small FEL and I have been useing it to back drag dirt and hual dirt for a building pad for a shop. I can get a king kutter 5' box with scarifers for $430 an andjustable 6' blade for $180...