Recent content by gearhead1

Ok, I read the other 4110 4WD posts....mine is a slight bit different. I just bought a used 4110 with loader, 762 hours. (I didn't catch the noise when I tested it, guess I had too high rpm on the engine.) When I have it in 4WD and go in reverse, I hear a knock noise (deep pitch like an...

I got an owners manual for my TO35 and the Autolite/AC/Champion plug numbers it gives are no longer sold. I tried to find a cross reference on google, but not much luck there. I took the old plugs out, 3 of them were an Autolite 386 and one was a Champion D21. The only thing I could find...

The PTO lever on my TO35 has 3 positions, I think the top says hydraulic, the center says neutral, and the bottom says ground. The PTO works when I put the lever in the top position, but not in the the other two....okay, but what is 'ground'?

I just bought a TO35 on ebay.....runs great, no major issues. I lifted up an engine block with a boom on the 3pt hitch and it lowers when I step on the clutch!!! My Uncle's 9N didn't do that!! I thought these had 'live' hydraulics. Can I change the 3pt lift so that it operated indpendent of...

My FEL (just bought a used tractor) wouldn't lift an engine block, nor would it lift a bucket half full of dirt, so I put a guage on the inlet side of the valve assembly. I was only getting 800psi. I adjusted the relief valve, but I can only get about 1100 psi out of it now. If I adjust...

I bought an old Ferguson TO35 tractor with a Midwestern Industries front end loader on it. I took the drain plug out to see what oil it has in it this morning (70 deg F ambient temp), and it appears to be about a 10 weight viscosity and is light tan in color not dark like an engine oil. The...

I tried to google it but couldn't find what I was looking for and tractordata.com is down. Someone probably knows this right off the top of their head. Can anyone tell me the major differences between the 1010 and 1020? I have a chance to get a 1010, so I went to koyker's website to see if...