Recent content by George2615

  1. George2615

    Towing 6 ton dump trailer with 6065

    If I was towing your 6 ton dump trailer with your tractor on steep hills I would definitely use a brake controller. 12K behind your tractor could easily push you down a hill which can cause a loss of control just as it could going up hill if you lose traction.
  2. George2615

    Change e-mail address

    It can be a hassle going to each site or forum where you use your email. There is no magic wand that will change them all. It's just time consuming. I've changed my Email once before and basically logged into each site and went to my user log-in settings and changed the Email addr. Took about 1...
  3. George2615

    Ssqa snowplow conversion advice needed

    I built mine from an old truck blade 7 1/2' as well. Got the QA blank plate from Titan, did my own welding, Bought replacement used cylinders at a local truck snow plow shop for $25ea. Installed a cushion valve in the middle where the hoses are attached. I ran 2 hoses from one of my rear remotes...
  4. George2615

    XR 4046 HC Diagnostic adapter

    Is that port you pictured located under the dash on the right side?
  5. George2615

    XR 4046 HC Diagnostic adapter

    Here's the adapter https://obd2allinone.com/products/catobd2.asp Here's another link to diagnostics https://obd2allinone.com/products/catobd2.asp
  6. George2615

    XR4041HC service and parts manuals

    A while back someone posted a link (or a source to the cloud or dropbox) to download the pdf manuals. I can't find the post using the search function. At the time I did download them but my previous laptop died and the files were not recoverable. Does anyone have the link?
  7. George2615

    XR3037H RPM up and down after a few minutes of operation.

    The difference is the XR3037HC (3000) series uses a Shibaura engine which was designed for regen every 5 hours. The newer 4100 series has the LS engine designed for regen about every 50 hours.
  8. George2615

    JIF Peanut Butter Recall,, Have You Tried To DECIFER The Lot Numbers??

    I had 1-40 oz jar. The number under the bar code matched one on the list. Wife took it back to store and they gave her a credit on her shopping order that day even though the recall said to just throw it out with no mention of taking it back to the store. The store had already removed all Jif...
  9. George2615

    LS SAYS A REGEN EVERY 2 HOURS IS NORMAL

    Some of the older LS tractors have the Shibaura engine. The owners manual says normal regen cycle occurs about every 5 hours (+ or -). Newer LS tractors have an LS engine and normally does a regen about every 50 hours.
  10. George2615

    Used tractor. Title?

    And if the owner financed and paid off the tractor he will have a lien release and should give you a copy with the bill of sale.
  11. George2615

    XR3037H RPM up and down after a few minutes of operation.

    Cummins fault code advisor is a downloaded app for my android phone. I'm sure there should be other available downloads for other phones. Do a search on your phone for Cummins fault code advisor. https://apkpure.com/cummins-fault-code-advisor/com.cummins.faultadvisor
  12. George2615

    XR3037H RPM up and down after a few minutes of operation.

    Sorry, I missed your reply. Myself and the OP have older model LS tractors with the Shibaura engine. Yours has the LS engine. Shibaura engine regens every 5 hours, LS is supposed to regen every 50 hours.
  13. George2615

    XR3037H RPM up and down after a few minutes of operation.

    Its ELM327. I ordered mine off Ebay but it shows currently out of stock. Also link to Amazom also out of stock. See post 44 in the below thread. If I recall it was under $34. https://www.tractorbynet.com/forums/threads/diagnostic-code-reader.390565/page-2...
  14. George2615

    XR3037H RPM up and down after a few minutes of operation.

    I'm not familiar with your Nexlink or how to set it up. I use an ELM plugged into the port (bluetooth connects it to my phone) and used a program Cummins Fault advisor (free download). It will read a lot of functions and most show a numerical value which I can take a snapshot and download on my...
  15. George2615

    Software for tractors

    a quick scan of the part numbers shows costs between $3800-4600. I suppose its not that much if you are a business but too much for the average hobby farmer.
 
Top