So I went out to move the snow with my bx25 and the tractor wouldn't start even after letting the glow plugs warm up, so I plugged the block heater in and after about 10 mins it fired of but kinda idled real high and blew out whiteish smoke. the it ran for a while then started to sputter and...
had an idea and created them today. held in by 2 bolts and 2 pins they are easily removed. Also all the forks are pinned in so that if I need a longer fork , I just need to pull them out and put longer ones in . Or take out the end 2 and move a pallet.
I took the idea for a tool box from the bx25d, got a inexpensive 12" tool box and fabricated up a clamp on mount and there we are.
not in the way as far as I can see and holds a lot of the small tools and parts.
I have a question for the knowledgable people here. I need to know what type of connectors are on the loader connections, specificaly the male side. there seems to be many different types.
How do I keep the shaft in the front mount from moving foward. It doesn"t have flats for the set screws, It sure does bend the pto shaft when it comes apart!!
Is there a way to put a stop on the bx2750 snowblower quick hitch to keep the pto joint from striking the lower part of the frame. Seeems like kubota didnt think this thru. They say dont raise blower with pto running. I think if there was same kind of stop so you cant lift it too high it would...