Wanted to give a conclusion for anyone that may have a similar issue. Ended up being the fuel crankshaft was sheared clean off between the 2nd and 3rd lobes. There was enough friction on it to continue to spin the 3rd lobe but it was way out of time. Almost invisible to see even with the high...
Hey thepumpguysc I do appreciate the offer. I do need to get this thing going sooner than later however I think I’m going to bite the bullet and put a $1200 injection pump in it. Waiting on a m8 adapter for my compression tester to verify that cylinder is good and if it turns out to be then the...
FEL is off the tractor right now to give access to the engine. i was using the tractor and loader for an hour before this happened so i have no concerns with the hydraulic system. i've now had the injection pump off 3 times and the fuel camshaft looks good.
850 hours, smoke is blue/grey ish but only when injector 3 is firing. when i bleed the pressure from cylinder 3 smoke stops. Valve lash was checked and adjusted at 800 and confirmed good now.
Hey guys, been doing some diagnositc on my 2010 CK20S and im at a loss.
Background: started tractor let it idle for 15 minutes, used FEL for half an hour cleaning snow and was putting it away and pitch of engine changed and immediately started to smoke. took it to the shop and started...