I know this is an old post but we find that the joystick is mounted way too high to be very comfortable. It's used a lot here especially when loading a 175 bushel manure spreader. The joystick on the L3940 is mounted at a much better height to seat ratio and it is easier to much easier to make...
Now just the other day when they were put about 15 loads of manure with a 175 bushel spreader the power reverser stopped working unless you pushed in the clutch and when you turned on the PTO it beeped 5 times and Caution(!) symbol flashed on the dash, the PTO would engage but it beeped every...
If you look back to like Nov 24 I said they replaced a wiring harness: Part# AL158036: Clutch Control Wiring Harness
I looks like never did say if that fixed it but yes that fixed that particular problem.
The Tech was here this morning at 8am. It didn't take him long to find an issue with a little micro switch on a wiring harness about 2 feet long. He said the switch is working intermittently and telling the computer that the clutch was in and out at the same time each time the switch wasn't...
Possibly. We were supposed to get a call from the local JD dealership first thing this morning, it's 10:17am and we're still waiting. It's Fall planting season but I guess that doesn't matter. Son put the grain drill behind a 120hp CaseIH Maxxum Monday because the Deere refused to back up to the...
"I am really surprised it doesn't store a code when it stops and red light comes on."
A mobile independent equipment tech was here last week on a overheating Kubota issue so while he was here we had him take a look at it. He actually pulled up two codes on the little display but could not...
Not exactly sure what they're doing. Quite frankly we've lost confidence in the dealership. We're going to touch base with them the first of the week and see what they say. Other than this it's been a great tractor for tedding, raking and pulling the grain drill but when it stops dead halfway...
We have a 2011 John Deere 5065M 5 cyl. turbo cab model and it randomly stops moving. The red ring gear illuminates on the dash and it will not move until you put it in Park and neutralize the Power Reverser, turn off the engine and restart. It's very random and it has been in the local JD...
Our L4060 says that it's using 0.7 gallons/hour now that's the computer telling us that but according the the number of hours put on tank fulls it seems about right. It regens about every 35-40 hours. It's sitting at 99% full of particulate matter right now as the operator got tired of piddling...
A bit off-topic but here's my take on Climate Change.
I’ve been a weather watcher for over 50 years and keeping records of extreme events but a few years ago when I retired I started keeping my own accurate records. I met someone that has over 50 years of his own accurate weather records. I...
Seems more like a HP race in that size category than something that's really useful because the weight just isn't there for the HP. There's still folks out there still using the IH 100 Hydro but it's a 12,000# tractor.
I know this post is old but I just saw one of these for sale at Ag-Pro for $75K. I thought wow that's up there. Then I looked at the specs and even though it's a 75hp tractor it's only putting 60hp to the PTO. Out of curiosity I looked at the Kubota L6060 specs and it's putting 54hp to the PTO...
When doing a chargeback on something that I consider to a fair amount of money say like one of their grapples, does the CC company ever actually go after the company to try and recoup the loss? I understand if they don't go after $20 but $3000.