greenie's latest activity

I have the same tractor with the same issue. I have not tried adjusting the rod to the rear. Seems like it might work. If you try...

I've had a 790 for 26 years. Every year the time and sweat involved with hooking up the mid mount mower gets worse. This spring it took...

Many tons of Calcium Chloride is spread on roads for dust control and to melt ice. In tractor wheels it can provide years of trouble...

A tractor on its side can have a runaway engine too. You were wise to shut off the engine quickly. Hydrolock can bend connecting rods...

Front tires under a loaded FEL bucket take a beating with the weight and the turning I'd recommend the 10 ply and compare the tire load...

I've had to do it for years. One hand on the PTO lever, turn the key with the other hand a second before lifting the PTO lever. If you...

Problem found. I may have to fire the guy that installed this. As I suspected, that square section yellow synthetic ring must have been...

There is also a throttle kit that can be added so throttle can be increased without tromping down on the pedal… The standard pedal...

Interesting.... When you figure it out would you post what the solution was? We had a L3400 and in below freezing weather the bucket...

Electric water heaters and ranges are usually fed with 10/2 or 10/3 romex and a 30 amp fuse - however if you look at the wires inside...

Have you tried starting the engine a second before engaging the PTO? With practice the engine will start and the PTO grinding will be...

Yeah those sweet ones seem to always get away, the one thing I have learned is sometimes you have to strike while the iron is hot and...

Just wanted to return to say Thanks. Ended up purchasing one of the decks off the link to Craigslist you posted. I was leary to buy, but...

My 790 has not allowed a grind-free pto engagement for years. Attachments with low rotational mass engage easier (fertilizer spreader &...

Thanks, I'll give that a try Update... The 9 step procedure suggested by RjCorazza worked and allowed me to clear the PO335 error...