Recent content by GregWatkins

Blade loose on 60\" MMM One of my blades is loose on my MMM. IF I reach under the deck and try to move the blades by hand, two of the three move together, but the third one (non-discharge side BTW) will move almost freely. I have just sharpened the blades and thats when I noticed it was loose...

I bought the Pats Easy Change system for use on my 2710. I am having a little issue with the spacers. Anyone installed this on a 2710 yet? It seems that only the large spacer will fit under the hitch. Has anyone else been able to get both spacers installed ?(by both I mean a thin and a thick...

I have a 2710 with a 60" MMM. I noticed when I cut the grass last time that there is a streak left near the middle of the cutting path. I checked the blades and they all appear ok. I removed and sharpened them and tried again with the same result. I even tried mowing in low with the same...

I usually use a drawbar on the 3 PH to tow a trailer. This works well. Sometimes, if the load is very heavy, the drawbar will rock backwards as I am towing the load. I have never had the trailer come loose YET, and I do not want it to. :~> Does anyone know of a device that will prevent the...

I have decided to get a post hole digger. A Leinbach Post Hole Digger is what I'd like. Does anyone have one of these on a 2710? If so, what model? Any complaints? Other types? Thanks, greg

I broke one of the hydraulic connectors (the blue one BTW) on the control valve assmbly of my FEL yesterday. It is where the blue hose connects to the control assembly. The hydraulic connector on top of the threaded connector is what broke. (It got bent and has a hole in it and the hydraulic...

Anybody have a tried and true method? I have a 2710 with a FEL. I usually use some combination of digging,pushing,pulling to get trees up. Of course, the amount of each depends on the tree type :~> Is there a BETTER way? So far, mine has been trial and error. Thanks, greg