So I pulled the boot and all looked well I there except one rod seemed to travel too far. I realized that the cap screws on the stick were in alignment with the rod. So I broke out the Allen wrenches and checked for tightness and found the bottom left was extremely loose not that it looked like...
Has anyone experienced their FEL Joystick getting sloppy after a lot of use? I have about 118 hours over 15 months using granite grapple mainly and occasionally bucket.
The stick flops around and even rotates slightly but it still controls the boom fine. It feels like it's going to fall off in...
I removed the backhoe today on my RK 24 and saw that the transhyd is at the bottom of the sight glass.. Should I top it off if I do what happens when all the fluid stored in the backhoe is added back to the tractor hydraulic system?
Thanks for the help!
I am curious if there is someone out there with an RK 24 that swaps implements regularly and could possibly make a how to video.
I ordered a box blade for mine and haven't ever removed the backhoe nor the FEL. The manuals arent very detailed.
Any help would be appreciated
RK had everything but the filters and a quart of gear lube they weresold out. They shipped them to me after a bit of a run around. my trans did not take the full amount. I think I ended up adding back about 4 gallons. I only drained through the plug on the side of the mid-PTO and not on the...