GS650GL's latest activity

  • G
    All brands of tractors can and do have floppy bucket syndrome, not because of a defect but because of the laws of physics. During the...
  • G
    When you said a newer tractor I thought you meant a current model, not a R4041 from 2011. The newer models have a different engine...
    • Capture.JPG
    • Capture 2.JPG
  • G
    GS650GL reacted to Racer4's post in the thread Lift Arm Ball Changes with Good Post Good Post.
    You can get sleeves to reduce the size of the lift arm holes. https://www.qualityfarmsupply.com/collections/lift-arm-bushings-balls
  • G
    GS650GL replied to the thread Lift Arm Ball Changes.
    You can get different size pins to put on your implements also, or just use adapter bushings as mentioned above. The easiest and least...
  • G
    Apparently the new MT2 series such as a MT242 now have a different loader control valve with an oil regeneration circuit that helps to...
  • G
    GS650GL replied to the thread MT242 regen not starting.
    I am told by my dealer that the regen lights operate the same as they did before with the LS engine. A blinking light means it wants to...
  • G
    GS650GL replied to the thread MT242 regen not starting.
    A couple things can be happening. To do an active regen while you are using the tractor, the engine needs to be warmed up to normal...
  • G
    GS650GL replied to the thread 3 point hitch will not lower..
    These subcompacts don't have draft control. When a hitch won't lower, it's usually the drop speed knob screwed all the way in, and if...
  • G
    GS650GL replied to the thread R4 Tire Pressure.
    The tire should be filled with beet juice to just below the valve stem when it's at the top. When they pump in the beet juice, the only...
  • G
    GS650GL replied to the thread Overnight FEL leak down.
    My dealer checked several new tractors on their sales lot. They raised the loaders and put lines on the cylinder rods with a magic...
  • G
    Running at higher RPM, working it harder, and not idling excessively does help to keep the exhaust burning cleaner and reducing the...
  • G
    GS650GL replied to the thread LS MT125 fuel tank leaking.
    There have been a few that had a defect in a molding seam when the tank was made, but that usually shows up in a short time after the...
  • G
    Who the heck is chatgpt and what makes them an expert on this subject? Looks like an AI generated story. I think it's funny that they...
  • G
    GS650GL replied to the thread Overnight FEL leak down.
    All hydraulics will eventually leak down, some more than others. That's why it's recommended to lower all implements to the ground for...
  • G
    That is correct, you only need one on the hose from the valve, and it does help floppy bucket syndrome. The one recommended above is...
Top