Recent content by gsgator

Go ahead and do both (or all four) cylinders at the same time. I was advised to do the same by the shop that rebuilt mine and chose not to. I was back in 6 weeks like they said with the other two. The new seals hold more pressure/ put more pressure on the older seals.

The bucket on my '05 2910 will not hold neutral and I think the loader control valve is malfunctioning. I searched the part number in Branson book but it doesn't cross reference to anything online. Does anyone have the model number for a 2-spool valve that will work and that I can readily get at...

I have a 2910 and was questioning my dealer about a loose tie rod that I have and found out there was an upgrade available for free within two years of purchase. I have had one repair under warranty a few years ago regarding the check valve for the fuel line, but no other issues to report. Is...

Does anyone else experience slow response from the 3ph? My 2910 has about a 3-5 second delay, which makes it frustrating for grading/etc. This model does not have the separate pump like the "i" models. Is this the reason for the delay?

I dropped my tractor off on Monday for the 50 service and to have them look at why the tractor started smoking (white) at the 540 speed. The shop called yesterday to let me know they were finishing up with it and the reason it was smoking was because there was a check valve installed on the...

I recently removed the FEL on my Branson 2910 to gain access for the 50 hour service. The system works pretty well to remove it. It was off for about a week and a 1/2. When I reinstalled it and hooked up the hydraulics, one of the quick connects started leaking. Do they sell the female QC's at...

Anyone dealing with nuisance fish in their ponds? For about 2 1/2 weeks now I've been trying to rid my pond of Armored Catfish. I noticed the first one because they build an upside bird's nest on top of the water. They tuck their eggs up underneath the nest and protect it visciously. I've been...

What\'s with the white smoke???? I have a new Branson 2910 (15 hours) and at start up it smokes a little. This is somewhat normal, and it goes away after a couple of minutes so it doesn't concern me. The last 2 days or so though, at 540 speed (2450-2500 RPM) the smoke comes back and worse than...