HamishMacCheap's latest activity
-
HHamishMacCheap reacted to Runner's post in the thread Oil Degradation In Storage Question with
Good Post.
I "heard" (maybe on this site) that you should shake up older oil jugs before pouring to re-mix the additives which can theoretically... -
HHamishMacCheap reacted to stevem5215's post in the thread Oil Degradation In Storage Question with Good Post.
I tested a old 55 gal drum of Pennzoil Multiduty 3p. It tested good at the Blackstone labs and is basically a 30weight oil from years...
-
HHamishMacCheap reacted to nyone's post in the thread Oil Degradation In Storage Question with Good Post.
I'm useing cases on motor oil I bought march of 2020 when oil prices tanked. I'm also burning home heating oil in equipment that I...
-
HHamishMacCheap replied to the thread Oil Degradation In Storage Question.Thanks to those who responded. Good info from all.
-
HHamishMacCheap reacted to big bubba's post in the thread Oil Degradation In Storage Question with Good Post.
myth or fact? (i don't know): if stored correctly, the petroleum product does not degrade, but the additive package itself is what...
-
HHamishMacCheap reacted to 5030's post in the thread Oil Degradation In Storage Question with Good Post.
Buy my engine oil in 55 gallon drums, it's appreciably cheaper that way and I don't use 55 gallons quickly anyway, but I keep the drum...
-
HHamishMacCheap reacted to DynamicD's post in the thread Oil Degradation In Storage Question with Good Post.
In my experience if the individual bottles are sealed you should be fine for several years, But I don't work at a oil lab or...
-
HI may buy a case of 10W-40 engine oil for my ATV and my Kawasaki Mule UTV because of uncertainty of future availability and also...
-
HHamishMacCheap reacted to CalG's post in the thread RS1400 Tiller. Where do I buy the wheel bearing for a tailwheel? with Good Post.
You will need to remove the failed bearing in order to replace it. Do that NOW, and capture the bearing dimensions. Mosey on down to...
-
HHamishMacCheap reacted to EddieE's post in the thread Is There a UTV Company That Makes Good Stuff and Backs it Up, Unlike E-Z-GO? with Good Post.
I think I found a solution to your problem. I rebranded my 2021 EZGO with these stickers from Amazon. It's now faster and more depndable...
-
HHamishMacCheap replied to the thread Kawasaki Mule rebuild!.Watch them grammar! Bubba should never be allowed to purchase or possess tools.
-
HHamishMacCheap replied to the thread Kawasaki Mule rebuild!.I have seen firearms that were butchered by Bubba. Did Bubba own this Mule before you bought it?
-
HWhen I was buying, CF Moto didn't exist. Since I'm not in the market, I never even heard of CF Moto until this year. When I was...
-
HHamishMacCheap reacted to JeepHead's post in the thread Kawasaki Mule SX limps and dies with Good Post.
Check the fuel tank vent.
-
HDid you happen to notice one of the blades folded forward, but not stuck in place like with the sharpened side towards the pan when you...