Recent content by HamishMacCheap

  1. H

    48" Rotary Cutter Capacity

    I bought a Dirt Dog 4' rotary cutter last winter based on my limited research in an attempt to find a "heavy-duty" 4' rotary cutter. My purpose for the purchase is essentially the same as yours, specifically, to use behind a light tractor in restricted food plots and narrow hunt property roads...
  2. H

    A Bad Day

    If there is oil on the dipstick but no oil pressure, my uneducated guess is the oil pump failed. I don't know enough to offer valuable mechanical advice but check the oil filter in hopes it has failed or the intake or supply side plumbing is somehow clogged. Good luck, I wish I could help.
  3. H

    Holly F...ng Branson!!!!!!!

    I just traded a UTV that was in the shop three times since I bought it in June of last year. I spoke to the shop manager when I dropped it off the last time and it didn't seem to me that he was confident there would be a satisfactory resolution to the problem. There were also a couple of very...
  4. H

    JU Fabworks Tie Downs on a Kubota LX2610SU

    Earlier today, I ordered a pair of JU Fabworks tie downs for a Kubota LX2610SU since I don't wish to gripe down chains or straps over the front end loader bucket or grapple. It may have been wiser to pose this question before I placed the order but do any forum members have experience with this...
  5. H

    Is my diesel still usable?

    If the cans were capped and under a tarp, it seems quite probable that water did not get into the cans. 8 month old diesel is still good, I personally would use it without great concerns.
  6. H

    Bush hog

    There may be some life left in the old bush hog yet. Good luck.
  7. H

    Bush hog

    I would worry more about the gearbox than the blades. Before I used it, I would try to tighten the blades but also, change the gearbox oil.
  8. H

    Minimum HP Requirement for Subsoiler

    Not what I wanted to hear but the advice is useful. Thanks - Hamish
  9. H

    Minimum HP Requirement for Subsoiler

    I don't own a 3pt rotary tiller and I don't want to buy one now. I speculate they are in excess of $2K now, probably more. Plus, the rare baseball sized rock would do it no favors. Thanks for the idea, it would make life more simple.
  10. H

    Minimum HP Requirement for Subsoiler

    Generally, established food plots. No stumps and no large rocks. Over the years, I have removed the really large rocks and now, when I find one that is baseball sized, it is a rarity. However, I sold two out of three hunt properties this year (my reason for downsizing equipment) but I think I...
  11. H

    Minimum HP Requirement for Subsoiler

    Probably not much more than 6 to 8 inches since the seeds (oats most often) are spread on top of the food plot after ripping and discing. I use a poor man's cultipacker (an 8' 6X6 with chains) to smooth the ground before distributing the seed, fertilizer and lime in a 3 point rotary spreader...
  12. H

    Minimum HP Requirement for Subsoiler

    The Kubota has ballast in the rear tires but it has industrial tires rather than ag tires. I fear this may not work in my favor.
  13. H

    Minimum HP Requirement for Subsoiler

    Any ideas of a minimum horsepower requirement for a single point subsoiler in hard clay? Is a 24 HP Kubota LSX2510SU sufficient? The red clay in my area can get hard as a rock when it doesn't see rain and without someway to rip the soil, using a disc harrow, especially a light weight disc...
  14. H

    Bush Hog flex link needed!

    Have. Photo or two of the rotary cutter available and call Bush Hog and ask for their assistance.
Top