Harry in Ky's latest activity

Replace the gear and the shaft? Major project. And for what? A ground PTO feature that's (probably) never been used, and chances are...

Typically cylinder seals are not proprietary. People who build cylinders (and loaders) source them from what's commonly available...

Yes. Part number is 359293X1

Your symptoms indicate a possible slipping clutch, not a low power issue. The metalic sound you heard, could it have come from the...

As I see it, you have few choices. You live with what you have. You split it and go through the clutch.

I make no promises in that regard, but it looks like an obvious starting point.

I think you need to provide more and better details of the failures and repairs before any worthwhile replies will happen.

I'm just guessing here, but it looks very similar to the rear end housing from the 5000 series tractors. Based on this diagram I would...

"Something I should be looking at?" Probably so, but some knowledge and experience on your part (or whoever is working on it) would go a...

You're describing pedal free play adjustment. What does you manual have on the internal adjustment? Assuming you've been there? Have you...

"Did I make a mistake buying a Mahindra with a computer and EGR?" Do you really have to ask?

Typically that style PTO clutch lever has a latch mechanism (similar to a brake pedal lock) where you can lock the lever in the up...

Lifting the lever should disengage the PTO clutch disc (same as depressing travel clutch pedal) so the clutch disc stops turning and you...

You're still not getting it. The sleeve goes in the N port and yes you need the third line. T port needs to connect to tractor sump by...

Without a power beyond sleeve in the valve you risk having the downstream circuits blocked if/when you need the relief valve to...