Harry in Ky's latest activity

  • H
    https://www.mycnhstore.com/us/en/caseih/na/tractors/agricultural/naaa01agr089under100hp/international-tractor/hydraulics/hydraulic-pump-a...
  • H
    Harry in Ky replied to the thread TYM (Branson).
    I'm not talking about automotive type systems, mainly the tractor systems. In the automotive world the sheer volume alone dictates that...
  • H
    Unfortunately, what took place "several years ago" may no longer apply. These days it seems all too many dealer shops have digressed to...
  • H
    Harry in Ky replied to the thread TYM (Branson).
    No matter who builds the engine, there is no comparison between the old "common sense" fuel system and the (highly touted) common rail...
  • H
    Harry in Ky replied to the thread CK3520SE HST.
    Explain how you tried to "engage the starter manually". If you did that correctly and it still won't turn over, your problem is not...
  • H
    Harry in Ky replied to the thread John Deere won’t start.
    Typical "chain of command" on those tractors is the start signal begins with key switch. One tiny wire from there leads to the PTO...
  • H
    Harry in Ky replied to the thread QUICK CONNECT REAR LEAKING.
    Wrong fluid types can cause a few different problems, granted, but not that one. I've run across some Kubota couplers that leaked when...
  • H
    Harry in Ky replied to the thread John Deere won’t start.
    This is testing voltage where? At the battery? at the starter? at the key switch? What counts is the voltage at the start signal wire on...
  • H
    Harry in Ky replied to the thread open hydraulics.
    So this is an M100, cab tractor? Has a loader with mid mount cable controlled two spool valve under the right cab door? The hydraulic...
  • H
    Harry in Ky replied to the thread open hydraulics.
    Lots of replies so far but not a lot of help yet. Why not start over. Tell us about the system, what went wrong to begin with, why you...
  • H
    Harry in Ky replied to the thread open hydraulics.
    I think you're adding confusion to the situation. There's nothing wrong in adding a tee and pressure gauge (which as I understand it is...
  • H
    Harry in Ky replied to the thread Older CK25Hst stop solenoid..
    I'm always in favor of a creative workaround to help beat the system. Been there, done that, more times than I care to count.
  • H
    Harry in Ky replied to the thread Tn75s air conditioning relay.
    You claim the clutch and compressor are working, but your results don't confirm that. No matter how much refrigerant you add, if the...
  • H
    Harry in Ky replied to the thread Looking for seal kit.
    https://www.pneu-draulics.com/ This is where I go. You might contact them with the sizes and dimensions of the parts you can't find...
  • H
    Harry in Ky replied to the thread Looking for seal kit.
    I've never been to Hercules Seals, but from their website it looks like the sort of place that would have what you need. I'm wondering...
Top