Harry in Ky's latest activity

We saw at the beginning of all this something about borrowing gauges. So far, no report on how that worked out. Just a lot of "it might...

It's a button clutch, they don't always smell the way woven linings do. And yes, it's slipping. Any free play in the pedal?

I know I'm dense, but your logic here escapes me. Do I have this right? Engine has a miss. (mostly cylinder #1) You checked valve...

There's more to servicing A/C systems than the "nuts and bolts" then adding freon. Why does the compressor need to be replaced?

Are you at all familiar with the John Deere thermister principle? Measurements of the coils really aren't necessary if there's no signal...

Waste of time. Neutral switch might affect the start circuit, but not the shut off solenoid.

Sure sounds like the dreaded thermister type of thing. Do a search for John Deere thermister problem and see what you find. Should be a...

Point noted.

Everybody has their own ideas about what's "the best" option. You will no doubt get a few in short order. No offense intended, but has...

Then you're pretty much stuck with what you have.

As I see it, he's on the right track. The problem will indeed go away. On someone's trailer.

If that's what's required he's better off mounting a sun shade on his zero turn and peddling this pile.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/3236/referrer/navigation/pgId/441219 Just ASSUMING here, this is what you...

Good luck with the head gasket.

Well we know a bit more now than we did at the beginning of all this. I came in thinking the tractor (probably) handled this load...