hayden's latest activity

I'm always curious when someone is selling a full package like this. Why? Did they do a big upgrade on everything? Are they moving...

If you are only blowing light, fluffy snow, and no more than a few inches, 30hp is probably OK. But in deeper snow, or wet snow. my...

With a sudden loss of fuel at two cylinders, coupled with discovery of dirt and gravel in the tank that has to have been intentionally...

"Rocks in the tank and fuel elbow"? Did someone put crap in your fuel tank? A sudden loss of what seems to be two out of three...

What's involved in PA to make the hay "organic"? Is there some sort of certification process? Also, what do they do to replenish...

Setting aside all the sniping, if he changed the filter and now has no hydraulic pressure, then it seems likely to be one of two things...

A GPS won't be very accurate. If you can string a small hose, it will be exact. A surveyor's total station would be accurate too, but...

I’ll second the value of a hydraulic top link. I wouldn’t have a tractor without one.

I would add rear remotes when/if you need them as you accumulate implements. No need to spend the money now for something you might...

The water pressure will tell what elevation the top of the water in the pipes is located at. That will be some amount above the leak...

I have a 2007 L5740 and in the 18 years I have owned it I have not had a single failure. Nothing. I have broken a couple of things...

Leonz captured the issues pretty well. I took this approach to mount an hydraulic powered snow blower to my front loader. The blower...

The 040 has a 3 cylinder engine? I had assumed it was the same as the 121-3 with 4 cylinders.

This is part of what prompted my thread a while back asking how farmers make money. I think the short answer is that most do not. The...

As for ratings, I have never paid much attention to the branch thickness specs. They are just too vague and subjective. Instead I...